HackBox - Ethical Hacking Tool

109 downloads · 1 year ago · HackBox is an ESP32 CYD (Cheap Yellow Display) based wifi multitool that runs "Marauder" or any othe

This model is restricted by licensing terms.

View license.

Description

HackBox is an ESP32 CYD (Cheap Yellow Display) based wifi multitool that runs "Marauder" or any other firmware you load on it.

The case has room for a GPS module that I will be adding in the near future.

Assembly: -All hardware is M3

-Flash Marauder using the web flasher: https://fr4nkfletcher.github.io/Adafruit_WebSerial_ESPTool/

-Modify the ESP32 antenna to use an external one following this video by "Inovatrix". This is really simple as long as you don't scrape too hard. https://www.youtube.com/watch?v=o4mtrueU6eM

-Print 4x of the spacers to use behind the 4 screen M3 screws.

-Wire the 5V from the 18650 pack to the rear of the screen. S3 is positive. S1 is negative. (I used hot glue after soldering the wires to secure them)

-Install the battery pack and antenna to the case.

-Install front cover and screen to the main body.

-Install Rear cover

Parts list: -Esp32 CYD https://www.amazon.com/dp/B0D8W9DSYZ?ref=ppx_yo2ov_dt_b_fed_asin_title

-Any RP-SMA Wifi antenna

-18650 Battery Holder/Shield https://www.amazon.com/dp/B0CJR1Y967?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Tags:

Discussions

dschultz884 months ago

I think design is great overall, I just dont understand the choice to cover up the type C charging port on the battery sled. Seems very inconvenient to have to take it apart and remove the battery for charging.