Update: 0.6 scale Leopard with reinforced leg joints for softer PLA filaments, plus the test file has been added.

Cute Snowie Leopard is here! ✨ Exclusively for Patrons and Members 💕.

If you'd like to sell printed items, be sure you have an active subscription on my Patreon or Thangs Membership.

🐆 6 STL files 🐆 4 pre-painted 3MF file

🐆 2 STL files (0.6 scale Leopard with reinforced leg joints for soft filaments, plus the test file)

Here comes the fluffy Flexi Snow Leopard along with its keychain version! There’s also a plain version (a leopard without spots or marks, so maybe… a cat 😄). I also added a little bonus: a black leopard with whimsical Halloween eyes, just to start easing into the fall mood.

Customize it your way! You can move, scale, or remove parts like the pupils, eye glares, ears, spots, and little black marks. Just click on the Leo model in your slicer software, use Split Into Parts, then Alt-click the part you’d like to tweak.

Scaling was tested between 60% and 120%:

• Layer height 0.20 mm • Infill 15% • 2 wall loops • PLA works great.

When using softer PLA (like PolyTerra etc), make sure not to scale the model down too much, as the smaller joint parts may break or deform more easily.

Thank you and Happy Printing☺️!