Meet the snoozy, wiggly Capybara, a perfect addition to the Cozy Critters Collection!💕

You'll get:

🐻 4 STL files 🐻 1 pre-painted 3MF file

Here come Capybara Body, Snap-Fit Regular Head, and Snap-Fit Snoozy Head. This time, the Body takes on the role of a Keychain😃.

I’ve prepared pre-colored 3MF file in case you run into any issues with painting.

⚙️Printing⚙️

Support-free design, fast user-friendly snap-fit assembly once printed.

Scaling has been tested down to 40%:

• Layer height 0.16 mm • Infill 15% Gyroid • 2 wall loops • PLA works great.

For the best results, I recommend a 0.16 mm layer height due to the ears' position. Make sure you have good bed adhesion. Use Brims on 40-70% Scale.

When using softer PLA (like PolyTerra, EcoPLA, etc), make sure not to scale the model down too much, as the smaller joint parts may break or deform more easily.

⭕Anyway, If you’re scaling the model down, I recommend gradually increasing the infill density: at 80% scale, use around 20% infill; at 60% scale, go for about 30%⭕

Customize it your way! You can move, scale, or remove parts like the pupils and eye glares. Just click on the Capybara model in your Slicer Software, use Split Into Parts, then Alt-click the part you’d like to tweak.

Get a Commercial License, Monthly Deals, Bonuses, and a Welcome Pack with Exclusives:

Patreon

Happy to see you and your prints on my Socials:

Instagram TikTok

😊 Happy Printing!