Bringing you all the Tiny Bunny Dragon! So many of you have been asking for more Tiny Dragons for the Tiny Dragon/ Tiny Wyvern Collection and I thought this would be a cute little one for Easter coming up. It is decorated with eggs, spring themed feathers, and an adorable bunny face! Hope you all like it!

TWO .3MFs brought to you with the painting help of Tester Eli and Tester Julie! Thank you both!

As most Cinderwing3D "Tiny" Designs, the original size is usually pretty big. The "TINY" comes in where they have been designed with bigger links to be STRONGER and capable of printing at smaller, ACTUAL TINY sizes. :) This design has been tested between 100%-60%.

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Membership and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

For commercial license and monthly bonus models, click here!

Filaments I use! Not an exhaustive list but if I remember, it'll be here! Amazon Affiliate links!

3D PRINTING SETTINGS

FDM Settings 3 walls 10-25% infill No supports Try brims if you have adhesion issues. Models tested between 60-100% generally

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.