Hi Cinders! Bringing you all the Cherry Blossom Dragon! I love the elegant branches, fun flower tail, and new style dragon nose! It has been tested between 100% and 60% with great articulation and strength. This is a very detailed dragon with lots of little flowers. We do recommend a smaller layer height (.16) for more details, but it still looks beautiful either way. I take a lot of time to make sure dragons like this are strong and don't have parts that break off easily! Although it looks delicate - it is a tough one! :)

Huge thank you to Tester Kelcy (Kelcy's Kreatures) for taking the time to color all these tiny flowers and share a MMU with you all! Please check out the stunning MMU pictures above! Additional shoutout to SledgePainter for submitting their 3mfs as well!

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you would like to legally sell them commercially, please join my Membership and subscribe to the tier for commercial resale. Link Below! The Digital files are never to be re-sold, shared, or given away!

For commercial license and monthly bonus models, click here!

Filaments I use! Not an exhaustive list but if I remember, it'll be here! Amazon Affiliate links!

3D PRINTING SETTINGS

FDM Settings 3 walls 10-25% infill No supports Raft or brim if you have adhesion issues. Models tested between 60-100% generally

Resin Settings No supports, flat on plate 50 um layer thickness Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.