Most Entry sensors are not designed to handle the weather outdoors (Don't ask me how many sensors I killed before I worked this out). Rain can instantly kill them and the temperature can make the sensor disconnect randomly. That is were this case design comes in! This protects your sensor/magnet and will help it survive the United Kingdom rainy weather! This style of case has now been tested by many members of the public and tested the same designed (with the Ikea Door/Window Sensor) on my own front gate and been great for the past 2 years!

Dimensions inside are designed to fit the Aqara P2 Door/Window Sensors. https://www.aqara.com/en/product/door-and-window-sensor-p2/specs/ Sensor: 22mm Width x 77mm Height x 22mm Depth Magnet: 11.5mm Width x 36mm Height x 7.3mm Depth

Mounting:

• Use a screw through the case (Front to back Sensor: 31mm. Magnet: 17mm).
• Zip tie to the post through the base holes (Max 5mm wide). Use a nut and bolt to seal the case (M4 16mm).

License: This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.

Do you like the design? Want to give some feedback? feedback@chris3dprintsstuff.website or https://links.chris3dprintsstuff.website

Want to give me a tip? https://donate.chris3dprintsstuff.website