The Paint Brush Stand MkII takes the hex design to the next level, creating an enclosed stand to keep your paint brush from falling through/out of the stand. Print the brush holder face down so that supports are not needed.

I would recommend printing with 3 top/bottom layers and 3 walls, with 15% infill of your choice (I like gyroid myself).

The Paint Brush Stand MkII prints in 2 parts. To combine the parts together, line up the ridge along one of the long edges of the insert with the gap along the bottom edge of the stand. Then gently push the top of the insert into the ridge along the top inside edge of the stand.