one Art piece.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 127.43x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #ffffff PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) at layer #10 (0.88mm) swap to Blue Gray At layer #15 (1.28mm) swap to Grey At layer #21 (1.76mm) swap to Ivory White (11100) for the rest.