For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.15769mm

#042f56 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 #482960 PLA Bambu Labs Basic Indigo Purple (10701) Transmission Distance: 2 #f55a74 PLA Bambu Labs Basic Pink (10203) Transmission Distance: 8 #56b7e6 PLA Bambu Labs Matte Sky Blue (11603) Transmission Distance: 2 This print uses 4 unique filaments

Swap Instructions: Start with Dark Blue (11602) At layer #9 (0.8mm) swap to Indigo Purple (10701) At layer #15 (1.28mm) swap to Pink (10203) At layer #18 (1.52mm) swap to Sky Blue (11603) for the rest.