This evening I have 5 sets of bookmarks to share. First up are some owls.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.07817mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #4d3324 PLA Bambu Labs Matte Dark Chocolate Transmission Distance: 0.5 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5.1 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #6 (0.56mm) swap to Dark Chocolate At layer #7 (0.64mm) swap to Beige (10201) At layer #15 (1.28mm) swap to Jade White (10100) for the rest.