Week 65 - set 2

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Cocoa Brown (10802) Transmission Distance: 1.4 PLA Bambu Labs Matte Plum (11204) Transmission Distance: 2 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 5 unique filaments

Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Cocoa Brown (10802) At layer #15 (1.28mm) swap to Plum (11204) At layer #19 (1.6mm) swap to Cyan (10603) At layer #23 (1.92mm) swap to Jade White (10100) for the rest.