3rd set - For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23723mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #482960 PLA Bambu Labs Basic Indigo Purple (10701) Transmission Distance: 2 #f5547c PLA Bambu Labs Basic Hot Pink (10204) Transmission Distance: 4.5 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Indigo Purple (10701) At layer #16 (1.36mm) swap to Hot Pink (10204) At layer #20 (1.68mm) swap to Jade White (10100) for the rest.