Week 48 set 3 - Roses.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used: PLA Bambu Labs Basic Red (10200) Transmission Distance: 4 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Mistletoe Green (10502) Transmission Distance: 5 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Red (10200) At layer #12 (1.04mm) swap to Black (10101) At layer #13 (1.12mm) swap to Mistletoe Green (10502) At layer #16 (1.36mm) swap to Jade White (10100) for the rest.