a couple simple signs tonight.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 149.23x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #4d3324 PLA Bambu Labs Matte Dark Chocolate Transmission Distance: 0.5 #7d6556 PLA Bambu Labs Matte Dark Brown (11801) Transmission Distance: 2 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Dark Chocolate At layer #13 (1.12mm) swap to Dark Brown (11801) At layer #17 (1.44mm) swap to Jade White (10100) for the rest.