3 designs of dragons tonight.

First, for this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 149x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Cyan (10603) At layer #12 (1.04mm) swap to Beige (10201) At layer #14 (1.2mm) swap to Jade White (10100) for the rest.