last set this evening is of the characters in the cartoon Hazbin Hotel.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3 #9d2235 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Maroon Red (10205) At layer #14 (1.2mm) swap to Beige (10201) At layer #20 (1.68mm) swap to Jade White (10100) for the rest.