2nd model set:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3 #c12e1f PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 #ff6a13 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 #fec600 PLA Bambu Labs Basic Sunflower Yellow (10402) Transmission Distance: 4.8 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red (10200) At layer #15 (1.28mm) swap to Orange (10300) At layer #20 (1.68mm) swap to Sunflower Yellow (10402) for the rest.