Week 19, 3rd set. These are depictions of exotic and fantasy style moths. Made to look like they are in a journal.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 68.57x205mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Brown At layer #13 (1.12mm) swap to Mandarin Orange At layer #16 (1.36mm) swap to Jade White for the rest.