Week 45 bonus - Hand bookmarks.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Green (10500) Transmission Distance: 2 PLA Bambu Labs Basic Purple (10700) Transmission Distance: 5 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Green (10500) At layer #11 (0.96mm) swap to Purple (10700) At layer #16 (1.36mm) swap to Jade White (10100) for the rest.