Blazing into the bonuses for last week - this one is cherry blossoms across the bookmarks.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.67x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 PLA Bambu Labs Matte Sakura Pink (11201) Transmission Distance: 2.4 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Dark Blue (11602) At layer #13 (1.12mm) swap to Sakura Pink (11201) At layer #22 (1.84mm) swap to Jade White (10100) for the rest.