3rd Set:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual Thickness is 1.99038mm

#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #002914 PLA Bambu Labs Basic Green (10500) Transmission Distance: 2 #ae835b PLA Bambu Labs Matte Matte Caramel (11803) Transmission Distance: 2 #f7e6de PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #6 (0.56mm) swap to Green (10500) At layer #9 (0.8mm) swap to Matte Caramel (11803) At layer #16 (1.36mm) swap to Beige (10201) for the rest.