This is another Free Model I am sharing. I was practicing color pop usage in Hueforge and, with some help from Discord Friends, able to get the reds separated from the greys in a new fashion. It is a artful depiction of a Geisha done in black and red inks.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Jade White At layer #5 (0.48mm) swap to Blue Gray At layer #6 (0.56mm) swap to Black At layer #12 (1.04mm) swap to Red At layer #19 (1.6mm) swap to Jade White for the rest.