Here is Jungle headphone stand, This awesome design is made to look like bamboo scaffolding held together with rope, The design prints all in one part without supports and comes pre-painted in 3mf. Model Size Width 68mm, Length 69mm, Height 210mm Print settings, Nozzle size 0.4mm, Layer height 0.25mm, Supports no, Brim Outer only, Rafts no, Print speed 200mms, Infill 15%, Wall count 3, Change the prime tower speed to 50mms if you can as its quite a tall print, I also changed the prime tower to have oval angle of 35 degree's,