Sean W
Balthazar42 followers
Follow
Balthazar
Balthazar
|
Image 1 of 5
Hextraction Hex Ritual Tiles 3d model
Balthazar
Balthazar
|
Image 1 of 5
Hextraction Hex Ritual Tiles 3d model
Hextraction Hex Ritual Tiles 3d model
Hextraction Hex Ritual Tiles 3d model
Hextraction Hex Ritual Tiles 3d model
Hextraction Hex Ritual Tiles 3d model
Hextraction Hex Ritual Tiles 3d model

Hextraction Hex Ritual Tiles

So this one's a little on the ambitious side. It's a pit with an alternate win-con that requires you to assemble 7 tiles. 6 of them fortunately are virtual and created by sinking balls in the pit.

Important note: The 6 candle tiles are actually all different and only have one notch each. I might make 6 notch versions if they turn out to be too annoying to play with like that.

As to where the 'effect star' and 'trigger jaggeys' indicators are; it's a big ritual star dealy, and the inner most part is jaggeys made from the star lines.

Also I apologise for not optimising the candles.

Talking of the candles, they are based on Melting Candle Tea Light Candle Holders by Tanya Wiesner. CC-BY-NC.


Discussions
Winner B
WinnerBit

Reminds me of the Yu-Gi-Oh Exodia cards...

...Hexodia...

Lykrast
Lykrast

Ooh interesting! Wonder how balls roll on them.

Lykrast
Lykrast

Question: how do you print them exactly? On my slicer (cura) with the 0.2mm layers I got (don't have another nozzle), like 90% of the markings get cut off as just little spurts on the surface.

Sean W
Balthazar

I did them with a 0.4mm nozzle and adaptive layer height in UltiMaker Cura.

Hextraction Hex Ritual Tiles

177 downloads · 3 years ago in  and 
Sean W
Balthazar42 followers
Follow