Simplify cleaning the bottom of your P1S!

Are you as lazy as I am? Do you let filament waste accumulate at the bottom of the printer because it's such a hassle to get the vacuum out? Of course you do. We all do.

This is a small ramp that fits nicely into the bottom front of the Bambu P1S (perhaps the X1C as well - I don't have one to test it on) and creates a ramp to more easily facilitate scooping up all the junk that have accumulated at the bottom of the printer.

This prints in two parts. There is a registration pin modeled - but it isn't truly necessary as both parts have a cutout for attaching double-sided tape so it sits still in the printer. You can choose to glue the two parts together but it really isn't necessary.

It prints without supports.

I printed mine in PETG so it would better withstand possible heat build-up, but unless you're printing ABS, ASA or other materials that require much higher temps, you could definitely get away with PLA.

Both STEP and STL files available.

I'm releasing this into Public Domain, i.e. fully open source with the parametric fusion archive file. All values are variables so it's easy to modify if you need to. Public Domain means you can do whatever the heck you want with it.