Muichiro's Print-in-Place Collapsing Sword
1.8K downloads · 2 years ago · **Muichiro's Collapsing Sword**
_Print-in-Place Version_
This version of the sword prints complete
This model is restricted by licensing terms.
View license.
Muichiro's Collapsing Sword Print-in-Place Version
This version of the sword prints complete all as one part.
The Replaceable Blade Version is available to my Thangs members.
Printing Find detailed instructions on how to print collapsing swords on my website. If this is your first time printing, I would suggest you try the test print first.
Printed on the Mulcore Core-XY 3D printer with Polymaker Metallic Pro PLA
Support and Licensing If you would like to help support more free models please consider joining my Thangs Membership. Get permission to sell physical copies of my models by joining The Collapsing Arsenal
Muichiro's Print-in-Place Collapsing Sword
1.8K downloads · 2 years ago in and
This model is restricted by licensing terms.
View license.
The Elucidator - Sword art Online - Print in place sword
I AM BATMAN: Print-in-Place Articulating Figure
Flexi Scorpion STL – Articulated Print-in-Place Scorpion Toy | No Supports | Easy FDM 3D Print
Flexi Cat Felix — Articulated Print-In-Place 3D Printable Cat Toy (No Supports Required)
James P. Sullivan Hand – Print-in-Place Flexible Toy
Flexi Donkey – Articulated Print-in-Place Model
Flexi Easter Bunny – Articulated Print-in-Place Model
Print-in-Place Mini Dumpster Fire Model – "This Is Fine" Edition
Flexi Love Cat | Print-in-place | No Support
Tactical 12oz Can Cup (Poser Edition) – Print-in-Place Multicolor STL | Display Style Drink Holder
Christmas Tree Ornament – Print-in-Place Flexi Toy (No Supports)
ORIGAMI STILT | Table Lamp E14, E26, E27 print-in-place
CheeseCube – Print-In-Place Infinity Cube
Flexi Fox | Print-in-place | No Support
Flexi Border Collie | Print-in-place | No Support
Flexi Crocodile | Print-in-place | No Support
Flexi hanging Monkey | Print-in-place | No Support
Skeleton Unicorn – Articulated Print-in-Place Toy
Witch's Cauldron – Print-in-Place Halloween Toy (No Supports Needed)
.png&w=3840&q=75)
hey im new to 3d printing and using orca with 0.15mm layer height using 0.4 nozzle do I bump my layer hight up that high?
hey what are the settings so the layers don't fuse together btw i use a flash forge adventurer 5m
Retraction settings. Find the test print before printing another.
i keep getting a layer of plastic fully covering where the blade is supposed to come out of even with adhesion turned off do you know how to fix this ? i use an anycubic kobra 2 neo
Your first layer is too low. Raising it up should fix that. I would also try the test print first, just to make sure you fixed it.
Someone is taking your model here: https://www.thingiverse.com/thing:6870143/
He has done this in the past with this same model too.
Someone is taking your model here: https://www.thingiverse.com/thing:6870143/
He has done this in the past with this same model too.
Its gone now, thanks!
Can I make this on a Tina2S? And if so how?
hey,can you make a colapsable sword from adventure time?any is fine,but the grass sword i think would look the coolest.thanks.