Dancing Ballerina

894 downloads · 2 years ago · A spinning ballerina with a skirt created using strings. Print at 0.28mm layer height and if using

This model is restricted by licensing terms.

View license.

Description

A spinning ballerina with a skirt created using strings.

Print at 0.28mm layer height and if using Bambu Studio set your wall generator to Arachne.

Be gentle when loosening the skirt pieces from the bed.

When removed from the bed gently shape the skirt downwards and place the dancer on the stand to spin.

Take a look at the video to see them in action

Tags:

Community Makes (2)

These Dancing Ballerinas are great. I really love them. I did encounter an issue with the thickness of the skirt strings near the waist and after a few weeks they are drooping and some are breaking off because some are so thin. Any suggestion on how to solve this? I used the original settings.

Community Makes (2)

Discussions

magician.1442 years ago

Nice

PrinterPrusa XL

PrintyCats11 months ago

These Dancing Ballerinas are great. I really love them. I did encounter an issue with the thickness of the skirt strings near the waist and after a few weeks they are drooping and some are breaking off because some are so thin. Any suggestion on how to solve this? I used the original settings.

PrinterBambu Lab A1

MaterialPLA

lamaidlow144 months ago

when printing this, the skirt strings did not print

Gantos11 months ago

Brilliant design slope

jmb64us1 year ago

Mine doesn't print with the strings?

RomuloVilella1 year ago

PLA , PET ou ABS?

Nearlydawndesigns1 year ago

I printed this on a P1S that is well-calibrated; I used the settings listed in the description. This model is very pretty, but not quite printable for me. The skirt strings snapped off at the front of the model. I used a spatula to carefully remove the blocks. but when I picked it up the filament snapped. Was this intended to be printed in PETG or PLA?