This is a digital 3D printable model of the Shakra Mask and Bracelets from Silksong.

📦 Included Files

• STL (cut for 200mm printer beds)
• Assembled OBJ file (for easy scaling)
• 3MF print-ready presupported file

All cut parts are placed on the print bed just as we would print them, saving you time.

📏 3D Model Dimensions

• Mask: 240 × 330 × 420 mm (9.4 × 13 × 16.5 in)
• Bracelet: 150 × 170 × 90 mm (5.9 × 6.7 × 3.5 in)

🖨️ Printer Settings

• Layer height: 0.15 mm
• Infill: 10% gyroid pattern
• Supports: 30 degrees organic
• For taller parts, use a brim for better bed adhesion

Settings may vary depending on your printer, so treat these as a starting point.

🛠️ Assembly

You will need glue, black wire (max 1.8 mm wide), a stretch band, 4pcs 10×3 mm neodymium magnets, and optionally white pantyhose and padding.

Mask

• There are two versions of Part 01 — with and without the visor. Make sure to choose the one you prefer. • If you're using the version with visor holes, we recommend covering the mask with white pantyhose before inserting the eyes. • Use the included pins and glue the parts together. • Glue the eyes into the holes; you can bend them using hot water or a heat gun, but it’s not necessary. • For the antennas, insert a black wire or filament (max 1.8 mm) and secure it with tape. • Use a stretch band to wear the mask. For comfort, consider adding padding inside.

Note: Pins for the Mask and Bracelet are different!

Bracelet

• For best wearability, use 10×3 mm magnets — this allows the bracelet to open and close easily. • Glue the included pins only to one side of the bracelet. • Insert magnets into both sides. Be careful to match the correct polarity. • Magnets hold the bracelet together, and the pins keep the parts aligned.

No 3D printer? No problem! Search for your local 3D printing services.

🖨️ Printer Settings

• Layer height: 0.15 mm
• Infill: 10% gyroid pattern
• For taller parts, use a brim for better bed adhesion

Settings may vary depending on your printer, so treat these as a starting point.

No 3D printer? No problem! Search for your local 3D printing services.

THIS IS US! Hi! This custom model was created by 3Demon. We're a team of 3D modeling and printing enthusiasts from Prague, Czech Republic. With over a decade of experience, we specialize in crafting 3D-printable cosplay accessories and other unique designs. Explore more of our creations on Thangs and join our membership for exclusive access to our incredible library of models! Follow and tag us on social media to stay in touch