Mimikyu - Printing Instructions Included

All the necessary printing instructions are included in the file. If you have any questions, feel free to DM me!

You will need a 1mm thick glass layer or any transparent material of your choice. Also, make sure to have a strip light of your choice for the lighting.

For Commercial Use & More: https://www.patreon.com/c/ACSPARK3D Enjoy showcasing your Mimikyu lightbox!

Note to always put the transparent layer last

LightBox Frame Settings: Layer Height: 0.2 Walls: 2 Bottom: 2 (Or 3 to hide infil lines) Top: 2 15% Infil

LightBox Back Plate Settigns: Layer Height: 0.2 Walls: 2 Bottom: 3 Top: 3 10% Infil

LightBox Transparent Layer: Layer Height: 0.2 Walls: 2 Bottom: 2 Top: 2 1% Infil

Design Layer Settings: Layer Height: 0.2 2 Walls 2 Top/Bottom 3% Infil No supports.