RTKeliteStation.stl

Hey rock star you just found my best selling desk organizer!  I print these in PLA with zero supports and 15% infill.  There is a little bit of cleanup required in battery compartment and along the recessed dips for the light installation.  I used a 4 ounce glass jar to hold IPA, standard sized wax pucks and a 5" x 4" silicone wax pad.  It is up to you if you want to sell the organizers with these items included.  The light is important, (Link below) to install the light push the end through the battery compartment and pull the wire through the top hole.  Once you have a good amount of wire start shoving it into the recessed light track, starting at the center of the spiral and follow it along.  There will be extra wire that will stay in the battery compartment area.  When you buy the lights, remove the clip with a phillips screwdriver so it will fit in the compartment.   I use a blunt end of the screwdriver handle or other tools to shove the wire into the track throughout the model.  These trays look amazing in rainbow, glitter and glow filaments.

https://www.amazon.com/dp/B08L8ZL5K9?psc=1&ref=ppx_yo2ov_dt_b_product_details

COMMERCIAL LICENSE - With your active support to Rytek through this Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires. 

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 20%
Infill Pattern: Gyroid
Supports: NO (May want to try minimum ones in the battery compartment.
Brim: No
Raft: N0
Skirt: No


Grinder/Picador GRZ 2.0!

Colador REFORZADO.STL

MrHerb- Nomz

MrHerb Parts 3mf - Nomz.3mf

PocketBox- Doobs and Boobs V2

PocketBox- DoobsandBoobs V2 Top (1).stl

Grinder Grenade 420 GRZ!

Conjunto Granada STL.stl

Custom Dab Tray for Iso Station

Custom Dab Tray.stl

All weed is.stl

Herb Nerd Pocket Box

PocketBox V3- Bottom- Tight Tolerance (1).stl

The Blaze tray and display stand

RTK-SimpleFlowerTray.stl

Seed Vicious

Seed_Vicious.stl

PocketBox- 50 Shades Blazed V2

PocketBox- 50 Shades V2 Top.stl

Rolling Supply Organizer - 2 Versions

rolling_organizer.stl

Gumdrop the Tokin Gingerbread

Gingersnapz.stl

Towelie Lighter Case

Towelie Lighter Case.stl

Kush Life Stash Box

Rollo Haze & Hachis skunk 

Rollo_Haze_PipeCox.stl

PocketBox- ButFirstWeed V2

PocketBox- But First Top.stl

PocketBox- 50 Shades V3

PocketBox- 50 Shades Top V3.stl

Lighter Holder and Joint Sauver!

PF Mini Bic FULL.stl

Barrel Grinder GRZ

Colador Barril.STL

weed

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

RTKeliteStation.stl

Grinder/Picador GRZ 2.0!

MrHerb- Nomz

PocketBox- Doobs and Boobs V2

Grinder Grenade 420 GRZ!

Custom Dab Tray for Iso Station

All weed is.stl

Herb Nerd Pocket Box

The Blaze tray and display stand

Seed Vicious

PocketBox- 50 Shades Blazed V2

Rolling Supply Organizer - 2 Versions

Gumdrop the Tokin Gingerbread

Towelie Lighter Case

Kush Life Stash Box

Rollo Haze & Hachis skunk

PocketBox- ButFirstWeed V2

PocketBox- 50 Shades V3

Lighter Holder and Joint Sauver!

Barrel Grinder GRZ