Lithopane_Housing.stl

A housing designed to hold a 120mmX120mmX2.5mm lithopane, and shine a light behind it. It was designed for use with lithopanes generated in Cura. Place three strips of 2 segments of LED tape like this product: https://www.amazon.com/gp/product/B00HSF65MC in the back of the housing and attach a switch and power supply. The switch holes are sized to fit this switch: https://www.amazon.com/gp/product/B00CQNQN4Q but the size and hole placement seems to be somewhat standardized. Use #2 x 1/4in self tapping pan head screws to affix the switch. The larger hole is for a barrel jack to terminal hole adaptor. Use one that fits the hole and the barrel jack on your power supply (also check that the voltage is appropriate for the LED strip you are using and the current rating is high enough). I affixed it in with hot glue but other methods may also work. 
Print with the back (largest face) down and with normal (not tree) supports with top and bottom support interface. There will be supports in the little notch that you can clear out with a screwdriver.

concealZippo

Most of us own a zippo lighter but where do you carry it. This becomes a problem for many of us, especially the ones whose pockets are full of other "useful" edc gear. So why not get yourself a copy of these files, design a fitting back spacer just for yourself, and carry this undying source of fire.
You can find more in my GitHub page :)
https://github.com/Micr0wave3/concealZippo

Main body.stl

louver lock.stl

Screw in storage bins, various sizes

garage_bin_100mm.stl

PSP Power switch

This is a PSP 3001 power switch I made for replacement but I uploaded it here if you need it :)

SteelStormBBFillHolderV3.stl

I'm working on a holster for my Umarex Steel Storm BB Gun, but the BB reservoir slides open at the slightest touch, dumping my BBs all over the ground. So a little time in Tinker-cad and 3 iterations I have this, a clip-on retainer that holds the front sight in place and keeps the reservoir closed. Print on end without supports and press-fit as in photos and happy plinking!

Tinkercad Design available:
https://www.tinkercad.com/things/31RvuXaGWw1


Star Wars The Black Series Boba Fett

Boba Fett.STEP

Simple Stackable Tea Bag Dispenser

tea-bag-holder-assembly.3mf

Sculpfun S6(S9) Air Assist Cone

I created this air assist for my Sculpfun S6 Pro but it should fit the S9 laser.  It replaces the stock acrylic cylinder and fixes in place with the set screw(s).

I used a cheap aquarium air pump from Wal-Mart with both outputs streamed into out tube with the check valves (I got a cheap kit from Petsmart with additional connectors, check valves, etc).  This uses cheap tubing from Wal-Mart as well.

The tip is an inflation needle, the same thing used to inflate footballs, etc.  The tubing and needle are connected using shrink tubing.  The needle is fixed to the printed part using CA glue.

The angle is set so it should hit directly at the 20mm distance from the work piece and the laser.  You can customize the length and/or bend the needle, however you need it.

You should also angle the needle, tubing in whatever orientation works best for you setup.

I printed this in Yellow PETG (color is what I had loaded and a darker color might be better).  I have noticed improved cutting and engraving after I started using this.

Titanic Movie Safe Box

Sliding Door Lock

Tape Measure Pegboard Holder

Main.stl

Gohan DBZ Bust

Gohan DBZ Bust 

Tag me on those awesome photo prints on twitter- https://twitter.com/carmelo_nazario

KEEP ON PRINTING!!

mini cap sheild

Swanky Gogo-Esboo (1).stl

Keystone Jack Port Blanker (Solid)

Covers for Keystone Ethernet jack panels. Work with Siemens type patch panels.

Soap Dish

Unit 1.4 - Ortho -Chair.stl

Drawer set

Business Card Holder - LH-24

A quick single body print requiring no supports. 3 version sizes are attached with a left and right-hand version.

This is an updated version of the following thing: https://www.thingiverse.com/thing:1478706 which held roughly 6-7 cards. I often found myself and my coworker running out of cards during large events and would quickly discard this print. The improved version highlights single hand dispensing, improved capacity, and a back clip to hold roughly 12 cards received from others.

Designed for 2.5" x 3" business cards, nominal sizes are:
-12 Standard Cards
-18 Standard Cards
-24 Standard Cards

Not big enough? Print two for a tactical reload at business events!

table

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Lithopane_Housing.stl

concealZippo

Main body.stl

louver lock.stl

Screw in storage bins, various sizes

PSP Power switch

View 11 new models

Star Wars The Black Series Boba Fett

Simple Stackable Tea Bag Dispenser

Sculpfun S6(S9) Air Assist Cone

View 47 new models

Sliding Door Lock

Tape Measure Pegboard Holder

View 47 new models

mini cap sheild

Keystone Jack Port Blanker (Solid)

Soap Dish

Unit 1.4 - Ortho -Chair.stl

Drawer set

Business Card Holder - LH-24