xmas-2014-ALL.stl

CHRISTMAS VISITING CARD

marry christmas.obj

Christmas star 🌟 

Made this last year but never released it.

Christmas star 2_Body 02.stl

Xmas Tree 9.stl

Christmas Tree symbol. Great as a wall decoration.

Open Lattice Christmas Bell

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**EASY PRINT**
If you just got your first 3D printer, this might not be the first thing you print, but it can be one of your earliest prints. Using the settings I recommend below, you should be able to print it with little difficulty.

**SUMMARY**
Here's a fun, quick, simple print to brighten up the holidays. The design is clearly a bell, but it also references Renaissance architecture. 

**COMMON PRINTING PROBLEMS**
Assuming you use the print settings I recommended below, here are some common problems and possible fixes:
* Mushy print: Reduce print temp.
* Comes off bed: Increase raft size. Reduce print speed.
* Print looks rough: Reduce print speed.
* Breaks during printing: Reduce print speed and print temperature. If you can, increase cooling. 

**PRINT TIME**
With my settings, it took about 3 hours.

**PRINT SETTINGS**
*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.8mm. If you want to go thinner to reduce weight, consider using Cura's “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer. That may prevent gaps in the print.
* Top/bottom thickness: 0.3mm

*Infill*
This doesn't need any infill. Seriously. 

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce chance the bell is pulled off the plate curing printing.

* Overall: 60mm/s
* Outer wall: 30mm/s
* Inner wall: 40mm/s
* Travel Speed: 65mm/sec

*Build Plate Adhesion*
The first layer of the bell is just a thin circle. I've found that a thin (4mm extra margin) raft works well to provide bed adhesion. It also separates more cleanly than a brim for this model. The raft only adds about 10 minutes to the print time.

*Supports*
I recommend printing with supports to ensure the roof of the bell prints cleanly. Ok, it doesn't show when it's hanging up, but I'm a perfectionist. With these settings, you'll only get supports where you need them.

* Support placement: Touching buildplate
* Support overhang angle: 71 degrees (this really is all you need)
* Support pattern: Gyroid
* Support wall line count: 1
* Support density: 15%

Flexi Ginger Bread Man Keyring for Christmas!

Flexi Ginger Bread Man Keyring for Christmas!

You can use color change to make different color for details!

The Batman Christmas Ornament

This Ornament is based on the Batman Logo.

Open Lattice Christmas Topper

open lattice topper no supports.stl

RoboCop Christmas Ornament

This ornament design is based on RoboCop. 

This was printed with a .4mm nozzle.

The gCode that is included is for an Artillery Sidewinder X1, which includes auto-leveling code.

Pumpkutus of Gourd Facial Implant

Pumpkutus of Gourd implant.step

Halloween Pumpkin Coasters

pumpkinCoaster_ver_01.stl

Halloween cookie cutters

Tree and Spider remix (small and hollow)

Scary tree with Cute spider and web.
GLOWING!
There is a hollow place in the tree for an LED Tea Light.

Tree and Spider remix v0.3 rlm spider (small hollow) .stl

Monster Pumpkin🎃🎃🎃

This monster pumpkin is a great keychain for Halloween. It can also be used as a Jack-O-Lantern if you print it big enough. Follow for more daily designs. Feedback would also be appreciated.

Flexi-Pumpkin Regular.STL

Flex-Cat Halloween is a fun print-in-place object that is flexible.

This is the keychain version. See the other model for the non-keychain version.

This model was designed in collaboration with Magster.

Ghosts in the mirror are closer than they appear (Ghosts Only))

Halloween is just around the corner!
Objects in the mirror are closer than they appear!

Here is a model of Halloween ghosts seen in the car mirror (without BOO)

Happy Halloween!

Multiple Variations Available:
2 Ghosts with Boo
2 Ghosts only
1 Ghost with Boo
1 Ghost only

Ghosts in the mirror are closer than they appear

Halloween is just around the corner!
Objects in the mirror are closer than they appear!

Here is a model of Halloween ghosts seen in the car mirror.

Happy Halloween!

Multiple Variations Available:
2 Ghosts with Boo
2 Ghosts only
1 Ghost with Boo
1 Ghost only

Halloween Swinging Pumpkin Keyring

Spins, flexes, rotates, whatever you call it, it does it!

Print at 0.2 layer height - If you have an elephant foot problem, this will require a few turns to become free, but otherwise should be free from the bed.

Enjoy!

Don't wanna be a Scary Ghost for Halloween - Low Material

Don't wanna be a Scary Ghost for Halloween - Low Material

You can print with 2-3 perimeters, and it will be solid!



Ghost for Halloween - Round Eyes - Low Material

Ghost for Halloween - Low Material

You can print with 2-3 perimeters, and it will be solid!



special occasions

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 549 new models

CHRISTMAS VISITING CARD

Christmas star 🌟

View 10 new models

Open Lattice Christmas Bell

Flexi Ginger Bread Man Keyring for Christmas!

View 12 new models

Open Lattice Christmas Topper

View 20 new models

Pumpkutus of Gourd Facial Implant

Halloween Pumpkin Coasters

Halloween cookie cutters

Tree and Spider remix (small and hollow)

Monster Pumpkin🎃🎃🎃

Flexi-Pumpkin Regular.STL

Ghosts in the mirror are closer than they appear (Ghosts Only))

Ghosts in the mirror are closer than they appear

Halloween Swinging Pumpkin Keyring

Don't wanna be a Scary Ghost for Halloween - Low Material

Ghost for Halloween - Round Eyes - Low Material