- No supports
- No glue
- Just a fishing line

**Ikran or Banshee** is a flying creature from the world of Pandora depicted in the **Avatar** Movie series.

To assemble the model join the two halves of the body using the peg. Cut two pieces of fishing line of the same length.
I used 2 x 90 cm. Run the fishing line through the holes in the wings from the bottom and then through the hole in the bar above.
Tie a knot at the top and tuck the ends of the knot into the side slit of the bar so the string can’t move freely at the top. Repeat on the other side.

Then just tie the ring to the hole in the belly of the banshee using another piece of fishing line.

If you add some oil or some other lubricant to the hinges the wings will flap more. The movement is done by simply pulling on the bottom string.

3D printable beads are included that can be printed if you want to add more weight to the pulling string if you want to adjust the stationary position. Or you can add any other weight like washers for example.

**3D printing settings**
- No supports
- 0.15 mm layer height
- 15% infill
- A brim is recommended but not necessary.
- All cut parts are placed on the print bed as we would print them to save you time.
- At 100% scale the largest part of the body is 190 mm wide on the build plate (full wingspan is wider).

**THIS IS US!**
Hi! This custom model was created by **3Demon.** We're a team of 3D modeling and printing enthusiasts from Prague, Czech Republic.
With over a decade of experience, we specialize in crafting 3D-printable cosplay accessories and other unique designs. 
Explore more of our creations on Thangs and join our membership for exclusive access to our incredible library of models! 

Follow and tag us on [social media](https://3d-mon.com/links/) to stay in touch! 


pull toy

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Avatar Ikran Flying Mobile