Gear Cube Desk Lamp

Tool.stl

Lost Factory Cube - A generalist *diagnostic* cube

This cube tests for a lot of basic calibration and hardware issues on an FDM printer, all at once.

You need to print this cube:- 

at 0.2mm layer height
on a 0.4mm nozzle (or smaller) with 0.4-0.46 line width
The screw and rod parts snap off to test in the screw holes and normal holes. There are ghosting, overhang, cooling, ovality tests among other things. 

This work is licensed under a
Creative Commons (4.0 International License)
Attribution-NonCommercial, you may not redistribute this commercially, please link to this source. You can however show it in your videos or whatever, commercial or otherwise. 

Auxetic Cubes // 30mm 4x4

Auxetic Cubes 30mm 4x4.stl

Calibration Cube

This is a calibration cube based on my logo. The dimensions of the cube are 20 mm x 20 mm x 20 mm. The indentations are 1 mm deep. On the opposite side of each wall are small letters indicating X, Y, Z axes.

Blade Runner Ennis House Plant Pot

Ennistile_planter.stl

3x3 Puzzle Cube

b.stl

CREATEK S-221 | 3D Printable Storage Box (STL)

CREATEK 3D Printable Storage Boxes
- Stackable
- Optimized for FFF
- Part Numbers
- Reinforced Corners
- No Supports or Raft
- 50mm Grid Sizing

View all files in the CREATEK series, setting recommendations, and more: https://bit.ly/createk3d

This model is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

CREATEK_S200_v1.stl

rombocube | candle holder

cube.stl

Auxetic Cubes // 18mm 5x5 Stacked

Auxetic Cubes 18mm 5x5 stack.stl

Force Field Puzzle 3x3 Solid Cube

27.stl

S U P E R C U B E  //  10x10 Puzzle Cube

solutionguide.stl

Encapsulated Ball Fidget

CGD_Ball_In_Cube Final.3mf

Yet another infinity cube

infinity_cube_50mm.3mf

Cubemail Fabric Bowl

cubemail-bigcircle.stl

Cube and helix, impossible passthrough illusion

Helix.stl

CREATEK S-211 | 3D Printable Storage Box (STL)

CREATEK_S150_v1.stl

Shift Cube Fidget Toy

All Multicolour.3mf

Surface Slab (SplitP)

This piece is part of a set of two large slabs constructed from different varieties of triply periodic minimal surfaces.

See here for video: https://youtu.be/vKTHPB9hKvQ 

Download the set:
Fischer-Koch S: https://than.gs/m/868235 
SplitP: 

The slabs are 3 x 3 x 2 cubes of unit cells, with the central top cell removed to allow placement of a square vase or other similar type of container. Three different  heights of square containers are included.

The footprint of each is approximately 100mm x 100mm. 


CREATEK S-321 | 3D Printable Storage Box (STL)

150x100mm Stackable Storage

CREATEK 3D Printable Storage Boxes
- Stackable
- Optimized for FFF
- Part Numbers
- Reinforced Corners
- No Supports or Raft
- 50mm Grid Sizing

View all files in the CREATEK series, setting recommendations, and more: https://bit.ly/createk3d

This model is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

CREATEK S-321

Helix Test Cubev2.stl

Easy to print and it's the best way to check your printer

cube

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gear Cube Desk Lamp

Lost Factory Cube - A generalist diagnostic cube

Auxetic Cubes // 30mm 4x4

Calibration Cube

Blade Runner Ennis House Plant Pot

3x3 Puzzle Cube

CREATEK S-221 | 3D Printable Storage Box (STL)

rombocube | candle holder

Auxetic Cubes // 18mm 5x5 Stacked

Force Field Puzzle 3x3 Solid Cube

S U P E R C U B E // 10x10 Puzzle Cube

Encapsulated Ball Fidget

Yet another infinity cube

Cubemail Fabric Bowl

Cube and helix, impossible passthrough illusion

CREATEK S-211 | 3D Printable Storage Box (STL)

Shift Cube Fidget Toy

Surface Slab (SplitP)

CREATEK S-321 | 3D Printable Storage Box (STL)

Helix Test Cubev2.stl