Golden Snitch Ornament Ferrero Rocher Holder

schnatzV1.3mf

vaporeon - Pokémon - Fan Art - Christmas Ornament 

vaporeon_-_xmas_decoration.stl

TPMS Finial Ornament - Horizontal Gyroid

TPMS Finial Ornament - Horizontal Gyroid.stl

Ice Bubbles

Ice Bubble 50mm.stl

Ice Crystal Christmas Ornament #2

Ice Crystal Christmas Ornament #2 Hanger Frikarte3D.stl

Christmas Kitty - Christmas Ornament

ChristmasKitty_Ornament.stl

TPMS Finial Ornament - Vertical Gyroid

TPMS Finial Ornament - Vertical Gyroid.stl

Snowfall, Winter Dragon Child - Articulated Dragon Snap-Flex Fidget (Tight Joints)

Snowfall_Tight.stl

Starburst Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

Diamond Lattice Christmas Ball

Christmas Tree Surprise!

Snow Man.stl

Flexi Gingerbread Darth Vader Ornament

FlexiGingerbreadVader.V2.stl

Diamond Ornament Container (Open)

Display only Do not post.stl

Minimalist Reindeer, Seasonal Christmas Decoration

Reindeer.stl

 Flexi Gingerbread Chewbacca Ornament

FlexiGingerbreadChewbacca_Ornament_02.stl

TPMS Finial Ornament - Schwarz Diamond

TPMS Finial Ornament - Schwarz Diamond.stl

Hex Ornament Container (Closed)

Display only do not print.stl

Ice Crystal Christmas Ornament #4

Ice Crystal Christmas Ornament #4 Hanger Frikarte3D.stl

4 x Weight Plates Christmas Ornament [METRIC]

barbell_all_colors.3mf

Charizard Decoration - Pokemon - Christmas Ornament 

Charizard Decoration.stl

Christmas Spiral Teardrop 2023 

Christmas Spiral Teardrop Ornament 2023.stl

christmas ornament

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Golden Snitch Ornament Ferrero Rocher Holder

vaporeon - Pokémon - Fan Art - Christmas Ornament

TPMS Finial Ornament - Horizontal Gyroid

Ice Bubbles

Ice Crystal Christmas Ornament #2

Christmas Kitty - Christmas Ornament

TPMS Finial Ornament - Vertical Gyroid

Snowfall, Winter Dragon Child - Articulated Dragon Snap-Flex Fidget (Tight Joints)

Starburst Christmas Ornament

Christmas Tree Surprise!

Flexi Gingerbread Darth Vader Ornament

Diamond Ornament Container (Open)

Minimalist Reindeer, Seasonal Christmas Decoration

Flexi Gingerbread Chewbacca Ornament

TPMS Finial Ornament - Schwarz Diamond

Hex Ornament Container (Closed)

Ice Crystal Christmas Ornament #4

4 x Weight Plates Christmas Ornament [METRIC]

Charizard Decoration - Pokemon - Christmas Ornament

Christmas Spiral Teardrop 2023