Paracord Bead Kit // Beads and Endcaps

Paracord_Endcap_OctoTwist.stl

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

What's better than a donut? _SIX donuts!_

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

This 'Deconstructed' version is the same as the original, but with a sleek, refined exterior

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Once the glue is dry, you can remove the bands, and give the puzzles some good twists to rub off any excess E6000 between the faces.

That's it. The Donut Factory is complete!

---

**_Sources for Non-printed Parts_**

**24mm 2x2x2 Cube**
- [Eastsheen Mini 2x2 Keychain Cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889)

**14mm no hole ABS beads**
- [eBay](http://bit.ly/PuzzleBeads)

**or these Chinese Checkers Beads on**
- [Amazon](https://amzn.to/3byXlsV)

**6mmx3mm Neodymium magnets**
- [eBay N52](https://ebay.to/3kMB1A4)*
- [eBay N35](https://ebay.us/iHdF18)
- [Amazon](https://amzn.to/3Qtm6f6)

*Since this puzzle uses so many magnets the N35 strength ones are sufficient. N52 might be slightly overkill and pricey

**E6000 Craft Adhesive**
- [Amazon](https://amzn.to/3OHX22J)

**Silicone Bands for Assembly**
- [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6)

---

_Alright, get to work. These donuts aren't going to make themselves!_ Enjoy :)

Sakura Drawstring Beads – Flower & Petal

Drawstring Beads_Sakura.3mf

Astrolabicon Puzzle // Retro

astrolabicon-retro.stl

Leaf Bead

Stunning Maimu (1).3mf

KWOB Puzzle // Retro

kwob-retro.stl

KWOB Puzzle // Grid

Kwob_Grid.stl

Lil Chain Puzzle

LilChain.stl

Kwiblet Puzzle // Echo

kwiblette_echo_14mm.stl

Astrolabicon Pro // Grid

Astrolabicon_Grid.stl

Lil Astro Puzzle // Orb

Lil Astro Orb.stl

A simple bead

bead.3mf

True heroes bead (17 mm)

true_heroes.stl

Astrolabicon Pro // Retro

astrolabicon-retro-pro.stl

FIDJ Puzzle // Grid

Fidj_Grid_A.stl

the CHAIN puzzle // Grid

theChain_grid_A.stl

KWOB Puzzle // Frame

Kwob_Frame.stl

SPIRAL BEAD - 10 mm

Bead spiral v3 - 10 mm (repaired).stl

Bead spiral v3 - 10 mm (repaired) - Brass

Bead spiral v3 - 10 mm (repaired) - Bronze

Bead spiral v3 - 10 mm (repaired) - Copper

Bead spiral v3 - 10 mm (repaired) - Polished Brass

Bead spiral v3 - 10 mm (repaired) - Polished Bronze

Bead spiral v3 - 10 mm (repaired) - Polished Copper

Bead spiral v3 - 10 mm (repaired) - Silver

Bead spiral v3 - 10 mm (repaired) - Silver Polished

Bead spiral v3 - 10 mm (repaired) - Rhodium Plated Brass

Bead spiral v3 - 10 mm (repaired) - 14k Rose Gold Plated Brass

Bead spiral v3 - 10 mm (repaired) - 14k Yellow Gold Plated Brass

Bead spiral v3 - 10 mm (repaired) - 18k Gold Plated Brass

Bead spiral v3 - 10 mm (repaired) - Vermeil

Bead spiral v3 - 10 mm (repaired) - 14k Rose Gold

Bead spiral v3 - 10 mm (repaired) - 14k White Gold

Bead spiral v3 - 10 mm (repaired) - 14k Yellow Gold

Bead spiral v3 - 10 mm (repaired) - 18k Yellow Gold

bead

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Paracord Bead Kit // Beads and Endcaps

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

Sakura Drawstring Beads – Flower & Petal

Astrolabicon Puzzle // Retro

Leaf Bead

KWOB Puzzle // Retro

KWOB Puzzle // Grid

Lil Chain Puzzle

Kwiblet Puzzle // Echo

Astrolabicon Pro // Grid

Lil Astro Puzzle // Orb

A simple bead

True heroes bead (17 mm)

Astrolabicon Pro // Retro

FIDJ Puzzle // Grid

the CHAIN puzzle // Grid

KWOB Puzzle // Frame

SPIRAL BEAD - 10 mm

Lil Astro Puzzle // Groove

Beads of Organization XIII from Kingdom Hearts