Gearshift keychain v2

Body.stl

Stick Shift Fidget Toy

v10 SHIFTER BASE.stl

Gear Shifter Container Knob

Shift_Knob_Container_Top.stl

Dungeon Doorway

Dungeon_Door.stl

Logitech Shifter Stabilizer

This is a stabilizer designed to fit onto the screw clamp of the Logitech Driving Force Shifter compatible with the G29 & G920 series wheels. (It may fit other models like G27, I'm not sure

Logitech_Shifter_Stabilizer.3mf

Volvo Shifter Cable Bushing for 6-Speed Manual Transmission

Volvo M66 Shift Cable Bushing Insert.3mf

Fanatec SQ1.5 4040 Aluminium Mount Bracket.stl

**Fanatec SQ1.5**
_4040 Aluminium Mount Bracket_

Existing solutions available on the market either put the shifter too far away, too close, or encroached into the seated area of the rig. These brackets put the shifter directly over the 4040 extrusion. 

You'll need to print two - one for the front and one back. Should slide nicely onto a bit of extrusion with a width of 40mm. Print with the two prongs facing upward - no supports should be necessary.

**Other hardware required:**
* 4 M6 x 20mm bolts with head diameter of less than 12mm to hold the brackets to the shifter. The 20mm is important here to ensure that the screws don't go more than 15mm into the shifter, as per the Fanatec drilling guide for the unit.
* 4 M8 x 20mm socket cap bolts to attach brackets to profile.
* 4 M8 Slide nuts.


**This is for a 0.4mm nozzle, adjust as appropriate to your printer:**

* Increase the number of walls to 8, this creates a solid block where the bolts connect to the shifter
* If possible in your slicer, set the infill or number of walls in such a way that it creates a solid (100% infill) for the holes that the bolts go through for the profile.

These settings ensure you can tighten up the bolts plenty, without risk of crushing the plastic easily.

Gear Shifter Tray

DISPLAY ONLY Shifter Tray.stl

A Shifty Thang.stl

Solid Thangs gear shifter knob.  This is one of many shifter knobs I design for fun.  This particular one is a blank, meaning you drill it yourself and add in the nut that you want.

Or request a size and I'll upload one ready to print and add to a vehicle.  

I print 0.12 resolution and 100% infill.  It takes a good 7 hours, but it's worth it.  

At only 76 grams you can make 14 of these with one roll of filament. A custom shifter knob for less than two bucks!

Honda Shift Knob

GT Omega Cockpit Sim Racing Rig Adapter For Beavis Racing Shifter and Handbrake

This is an adapter plate used to attach the 3D Printed Beavis Racing sequential shifter and a handbrake to the small mount included on GT Omega brand sim rig frames. This plate will likely work for a variety of other cheap sim racing rigs including brands like Minneer, Vevor, Marada and Anman

Shifter

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gearshift keychain v2

Stick Shift Fidget Toy

Gear Shifter Container Knob

Dungeon Doorway

Logitech Shifter Stabilizer

Volvo Shifter Cable Bushing for 6-Speed Manual Transmission

Fanatec SQ1.5 4040 Aluminium Mount Bracket.stl

Gear Shifter Tray

A Shifty Thang.stl

Honda Shift Knob

GT Omega Cockpit Sim Racing Rig Adapter For Beavis Racing Shifter and Handbrake

M9 to M12 adapter

Sim Racing Sequential shifter

Replicator Robot - Star Gate

POwer Wheels Shifter

05 Toyota Corolla shifter bushing .stl

shifter lamp e14

TF: Prime Legendary Weapons