#Gridfinity Exacto Knife Block

I designed this storage block for the Gridfinity system by Zack Freedman.  
It houses three knives and can hold your extra blades. I've somehow accumulated three different sizes of x-acto knives so the model I printed is specific to them, but I included the fusion file so you can change the hole sizes to fit your knives.

RPG tray

rpg tray.stl

Gridfinity 1x5 Cable and Charger Holder

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for US-style wall plugs and cables. Prints well with 0.4 or 0.6 nozzle.

Supports not necessary unless you're using the magnet holes in the bottom, in which case you'll want supports on "touching buildplate" mode.

gaveta.stl

Gavetas  con soporte para mesa con orificios para tortillos

Simax 3D X Axis Linear Rail Conversion

Motor Nema 17

Gridfinity Tap and die holders

6x2 Tap and die wrench holder.step

Gridfinity Avery Glue Stic

Zack's glue stick holders were either too large or too small. This one is just right for the Avery Glue Stic.

Source is at https://github.com/vector76/gridfinity_openscad

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for bulk AA, bulk AAA, AAAA, 2032 (CMOS battery), A97/LR44/Other (Calipers, etc.), 18650 and 9-volt batteries. Prints well with 0.4 or 0.6 nozzle. 

Supports not necessary unless you're using the magnet holes in the bottom, in which case you'll want supports on "touching buildplate" mode. Tolerances are tight at ~0.5 mm due to the sizes of the batteries and needing to stick to 3-unit-wide model, but this should be achievable with pretty much any printer. For best printing, only adjust horizontal expansion if necessary to fit the batteries since the walls are all modeled to multiples of 0.4mm. Changing horizontal expansion will likely increase print time and reduce quality.

Gridfinity Stepped Drill Bit Caddy

Gridfinity Yubikey Holder

Made a gridfinity yubikey holder. Decided to upload it.

Gridfinity 64mm Hole Saw Caddy.step

64mm Hole Saw Caddy.step

Gridfinity compatible 1x1x1_5 4xAA battery holder.stl

A gridfinity compatible AA battery holder. Holds 4 AA batteries. Can be stacked. 1x1 and 1.5 high. Based on Zack Freedman's gridfinity storage https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba

Gridfinity compatible 1x1x1_5 9xAAA battery holder.stl

A gridfinity compatible AAA battery holder. Holds 9 AAA batteries. Can be stacked. 1x1 and 1.5 high

1x1x1_5 9xAAA battery holder.stl

Gridfinity Open Ended Holders

Gridfinity Open End Tool Holder 1x5.stl

ruler.stl

Digital Storage Desktop Holder

Serves as a desktop holder for USB sticks, SD cards, and Micro SD cards. With elegant hexagonal paneling on the side and raised bevel for USB storager

USB,SD,MSD Holder

Bearing pedestal for 30mm ball bearings

Small display for 30mm ball bearings to prevent them roling away from your desk/workbench

Rectangle

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

#Gridfinity Exacto Knife Block

RPG tray

Gridfinity 1x5 Cable and Charger Holder

gaveta.stl

Simax 3D X Axis Linear Rail Conversion

Motor Nema 17

Gridfinity Tap and die holders

Gridfinity Avery Glue Stic

Gridfinity 3x5 Ultimate Battery Holder (AA, AAA, AAAA, 2032, LR44, A97, 18650, 9v)

Gridfinity Stepped Drill Bit Caddy

Gridfinity Yubikey Holder

Gridfinity 64mm Hole Saw Caddy.step

Gridfinity compatible 1x1x1_5 4xAA battery holder.stl

Gridfinity compatible 1x1x1_5 9xAAA battery holder.stl

Gridfinity Open Ended Holders

ruler.stl

Digital Storage Desktop Holder

Bearing pedestal for 30mm ball bearings

Tacoma 2nd gen blank switch (center console)

View 11 new models