| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________
The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, so you can print exactly what you need and customize every piece to fit your space and style.

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you endless expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless, so your storage can grow and adapt with you.

**CLASSIC DRAWERS**
These drawers are based on the original GEN2 design, featuring a clean, functional layout with an integrated front handle. Designed for easy, one-piece printing without extra parts or assembly.
__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at [JERRARI3D.com](https://www.jerrari3d.com/gen2-modular-system)

**[• UNDER TABLE (GEN2 RAILS)](https://youtu.be/2UPSWt1l6U8)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://youtu.be/1AuZleSjCps)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_

These drawers are completely compatible and interchangeable with any GEN2 drawer systems in [240 length](https://www.jerrari3d.com/gen2-modular-system/240). 

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](10x2mm)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
• Label Maker (makes 12mm labels) - [I prefer this one](https://amzn.to/410DL1p)

• (*Optional - Under table) Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• (*Optional - Under table) Drill bit that is smaller diameter than the wood screws
• (*Optional - Under table) Pen, Marker, or Scratch Awl (for installing under tables)
 

**INSTRUCTIONS**

Detailed visual instructions at [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system)

INSTRUCTIONS

See attached videos or visit for basic instructions [JERRARI3D.com](https://www.jerrari3d.com/home)


Please note: The Non-Commercial license refers specifically to selling prints. You're absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍

GEN2 Classic Filament Drawer - 240-1W-05H

240-1W-05H Filament Classic Drawer.stl

~~The Box~~ ~ **Your Box** _~ Mix it Up!_

Think outside of the box and unleash your creativity! ~~The Box~~ is a modular design that allow you Mix and Match Colors and Materials creating a box that's uniquely yours!

**Features:**
- _Customizable Design:_ Mix and match different colors and textures to create a box that matches your style
- _Modular Construction:_ Easy to assemble and disassemble, allowing for endless combinations
- _Modern Aesthetic:_ Sleek design that fits seamlessly into any décor
- _Versatile Use:_ Ideal for storing office supplies, craft materials, jewelry, and more

**Build Specifications:**
- _Material:_ PLA, PETG, etc.
- _Resolution:_ 0.2 mm
- _Infill:_ 20%
- _Supports:_ Not needed
- _Rafts:_ Not needed
- _Assembly:_ Slides into place, can add glue to any levels ~ you decide!
 
**Why Choose _Charleston 3D Studio_?**
At _Charleston 3D Studio_, we pride ourselves on creating innovative and high-quality 3D printed products. Each design is meticulously crafted to ensure the best user experience and satisfaction.

The Box ~ Customizable Organizer 

The Box_ Level 2.3MF

The Box_ Assembly.3MF

When I saw the Strong TPU Strap by Turbopstros (https://www.printables.com/model/1451354-strong-tpu-strap-parametric), I had a vision. That's where this bag comes in. I created my version of the TPU strap which is in this file. 
Join me in creating a stunning, unique tote bag with this 3D-printed kit! This project combines 60 PLA flat rings with flexible TPU straps and a sturdy 3D-printed bag base to form a chic, interwoven design. The final product is a durable and stylish bag, perfect for carrying your essentials. If you choose, you can add a lined pouch for added privacy.

This design is a great way to blend 3D printing with crafting, using simple leather rivets to hold the beautiful braided structure in place.

Assembly Instructions (Braiding and Riveting)
Materials Needed:

60 x PLA Flat Rings (Included in file)
1 x Bag Base (Included in file) printed with fuzzy skin
TPU Strips (Print 4 of the included TPU strip file)
2 pieces @ 43" (Handle Strips)
5 pieces @ 25.5" (Horizontal Body Strips)
8 pieces @ 13" (Vertical Body Strips)
34 pairs of 6mm leather rivets

Tools: Hole punch, scissors, and rivet pliers (recommended for easier access).

Detailed Video Instruction: For a step-by-step visual guide, please check out the linked video instruction on my YouTube channel

Assembly Steps:

Prepare the Strips: Cut the 4 printed TPU strips into the lengths specified above for the handles, horizontal body, and vertical body strips.

Attach Handles and Vertical Strips to Base: Slide the 2 handles and the 8 13-inch strips into the slots around the bag base. Punch holes and attach these strips evenly around the perimeter of the bag base using a total of 24 leather rivets (12 pairs). Ensure the strips are secured.

Start the Braiding (Horizontal): See video.  After each round, you'll need to connect the 25.5 inch strip with a pair of rivet. 8 pairs on each side of the bag. 

Weave and Secure the Rings: Continue adding the PLA rings and weaving the horizontal strips, working your way up the bag. The rings should be held in place by the tension of the interwoven strips.

Secure Horizontal Strips: Once the main body is woven, secure the ends of the five horizontal strips to a vertical strip or the bag base using the remaining 12 leather rivets. The weaving action itself is the primary mechanism holding the bag together.

Interwoven Rings and Strap Tote Bag

straps and circle bag.3mf

A drink cooler… that opens and closes by itself? Yes — and it’s awesome.

The DrinkColder is a functional, mechanical, and totally novel 3D-printable drink holder and passive cooler designed to automatically open and close based on the weight of your beverage. No motors, no springs — just smart geometry, precision balance, and gear-driven magic.

An IceCozy freezer pack for the DrinkColder is available here... [https://than.gs/m/1364094](https://than.gs/m/1364094)

**Why You’ll Love It**
This is more than a drink holder — it’s a conversation starter, a mini engineering demo, and a satisfying desktop toy all in one. Whether you’re hosting a backyard BBQ or just need a cool way to store your LaCroix at work, DrinkColder delivers form, function, and fun.

**What Makes It Special**
**Self-Closing Iris Lid** – When you place your beverage can inside, the lid closes around it. Press down on the DrinkColder top and the lid opens as your drink rises up. It’s all mechanical.
**Desktop Engineering Toy** – Beyond just function, it’s fun. Watch people’s faces as they figure it out.  
**Print-Perfect Design** – Designed to print support-free, with one built-in removable brim to ensure successful printing.
Great Conversation Piece – On your BBQ table, patio, or even your office desk.

**Features**

- Fits standard 355ml (12oz) cans
- Includes optional cozy insert or TPU ice ring mold to keep your drink extra cold
- Uses internal counterbalance and gears for motion — no electronics
- Designed for PLA with no supports required
- Visual assembly guide included
- Dimensions: 114mm x 114mm x 167mm (4.5” x 4.5” x 6.6”)
- Top iris opening: 70mm diameter

**Tips for Best Performance**

- Use light lubrication at rotating joints
- Deburr sharp edges after printing

**Related Links**

IceCozy freezer pack for the DrinkColder... 
[https://than.gs/m/1364094](https://than.gs/m/1364094)

Shaded Drink Coasters…
[https://than.gs/m/1109920](https://than.gs/m/1109920)

Compliant Beer Holster…
[https://than.gs/m/1002137](https://than.gs/m/1002137)

Gimballed Wine Holster…
[https://than.gs/m/1066121](https://than.gs/m/1066121)

**Visit my blog for more details and other designs**
[https://www.logicalplanet.com/](https://www.logicalplanet.com/)

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.

**20250617: **

1. I found that where the Top Walls (111) part was originally printed inverted, if you get any curling on your bed it does not sit perfectly with the Top Cap (101).  So I now recommend printing it non-inverted.  Therefore I have changed the brim location, modified the orientation in the STL and revised the part.  The new part is version 1v00a3 (the original was 1v00a).  If you are printing this model for the first time or you printed it successfully already you can ignore this. 


**Top Walls         Filename                                                           Status**
Original            DrinkColder 1v00a1 111 Top Walls         Removed
Revised            DrinkColder 1v00a3 111 Top Walls        Replaces 1v00a1

2. I discovered that the upright elements of the Base (301) could snap off relatively easily while inserting the Posts and Gears so I have strengthened it.  If you are printing this model for the first time or you printed it successfully already you can ignore this. 

**Base                   Filename                                                          Status**
Original             DrinkColder 1v00a1 301 Base              Removed
Revised             DrinkColder 1v00a3 301 Base             Replaces 1v00a1

3. While working on a Tallboy (16oz) can version, I realized that I could make the top assembly a little (10mm) shorter.  Doing so changes nothing about how the DrinkColder operates but it makes it smaller overall, and therefore faster to print and with less material.  So it is a great alternative.  If you would like to use this new shorter design you need to print the new Top Walls (112) and also a new shorter Ring Gear (212). I am not sure how to best present that so I am leaving both sets of parts (the original and the shorter ones) in the posting.  All other parts remain the same.  

**Top Walls         Filename                                                           Status**
Original           DrinkColder 1v00a1 111 Top Walls         Taller Version 
New Part         DrinkColder 1v00a3 112 Top Walls        Shorter alternative to 111

**Ring Gear         Filename                                                           Status**
Original            DrinkColder 1v00a1 211 Ring Gear        Taller Version (pairs with 111)
New Part         DrinkColder 1v00a3 212 Ring Gear        Shorter alt. to 211 (pairs with 211)




DrinkColder (12floz) – Self-Closing Drink Holder & Cooler

DrinkColder 1v00a1 301 Base.stl

DrinkColder 1v00a3 112 top walls (standard) shortened.stl

DrinkColder 1v00a3 212 ring gear (short).stl

**Don't forget to ❤️, add to a collection, and follow SUNA for more fun creations!**
___
This is probably not the first clean/dirty dishwasher magnet you've seen, but ~it is the coolest~ this one doesn't contain death crystals! A simple, easy way to keep track of your dishwasher - as long as you remember to flip the sign you will no longer have to guess & inspect dishes to figure out if it was run. There is also a blank sign for you to add your own text! Check the attached YT video to see a quick tutorial on adding negative modifiers like text to a model!

**Dimensions**:  100 x 60 x 4 mm (~3.9 x 2.4 x .16 in)

**Weight**: ~19g + 1g waste

**Additional Items**: You will need 2x Magnets, sized ~20x5x2. You can find them [here on amazon](https://www.amazon.com/gp/product/B07Q6564FB/).
Note that tolerances are loose on these magnets so if one does not fit well just try another from the set. You may also try a little glue if you have any issue with them coming loose. 

___
**PRINTING**:
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- 3mf included with all three designs and a layer change added at z=1.2mm (layer 6 for .2mm layers)

___
‼️ All models are the exclusive intellectual property of SUNA. SUNA models are protected under applicable copyright laws and international treaties. Unauthorized sharing, distribution, reproduction, or sale of these models in any form is strictly prohibited.

Users are granted limited rights to download and use models for personal, non-commercial purposes only. Any commercial use of these models, including but not limited to selling, modifying for sale, or redistribution, is strictly forbidden unless the user subscribes to a valid Thangs license with Commercial Rights.

Magnetic Dishwasher Sign - CLEAN | DIRTY

display_magnetic_clean_dirty_curlytext.stl

display_magnetic_full_set.3mf

Elevate your workspace with _The Dock_ ~ a charming MagSafe solution. Crafted with precision, _The Dock_ ensures your iPhone is always within reach, enhancing both the aesthetics and efficiency of your desk.

**Design:**
- Fit Compatibility: Fits official Apple MagSafe Charger
- Wire Management: Hide your wires through the integrated wiring management route
- Adjustability: Ball mount design allows for adjustable angles and orientation
- iPhone Compatibility: iPhone 12, iPhone 13, iPhone 14, & iPhone 15

**Build Specifications:**
- Material Compatibility: Ideal for PLA, PETG, ABS, Nylon, etc.
- Resolution: 0.12 mm (for smoothest finish) or 0.2 mm 
- Infill: 20%
- Supports: Yes (just for the Riser)
- Rafts: Not need
- Assembly: Apply a thin layer of super glue to combine the Base & Riser. Twist-lock the Riser ball into Mount

The Dock is easy to print, ensuring a seamless assembly process from start to finish.


The Dock ~ Phone Stand

The Dock_Base.3MF

The Dock_Mount.3MF

The Dock_Base_Watch Version.3MF

The Dock_Riser_Watch Version.3MF

Bring charm to your outdoor space with this beautifully designed Two-Story Cottage Birdhouse STL by 3D Craft Hub.
This digital file is perfect for anyone who loves 3D printing, birdwatching, garden decor, or simply wants to add a creative touch to their home environment.

⭐ Features
✔ Two-story cottage-style birdhouse
✔ Easy-to-print design for all FDM printers
✔ Print-in-place compatible components
✔ Includes realistic windows, arches & rooftop details
✔ Large entrance for small birds
✔ Perfect for gardens, patios, balconies, or indoor decoration
✔ Designed for durability & long outdoor use
✔ Clean STL mesh — ready to slice & print

📦 What You Will Receive

📁 Digital Download (STL Files)
No physical product will be shipped.
You will receive all STL files needed to print the complete birdhouse.

🖨️ Recommended Print Settings
• Layer height: 0.2 mm
• No supports required for most parts
• Infill: 15–20%
• Material: PLA / PETG (for outdoors: PETG recommended)
• Print bed: 220×220 mm or larger
• Assembly is simple — glue or screw together as desired

🎯 Perfect For
• Garden & outdoor decor
• Backyard bird enthusiasts
• DIY projects
• Kids' outdoor activities
• Spring and summer decorations
• 3D printing hobbyists looking for fun multi-part models

🔒 License & Usage
This STL file is for personal use only.
If you need commercial licensing, you can follow the rules provided on Etsy or Thangs, depending on where you downloaded the file.

For custom designs, modifications, or exclusive commercial rights, please contact us directly — we’d be happy to help bring your idea to life.

 Garden Cottage Double-Story Bird House For 3D Printing (STL)

Bird House 3 V3 Full STL.STL

🪵 **The Push-Push Wood Drawer System** 🗄️

Bring some style and _supreme satisfaction_ to your desk! These **modular**, wood-textured drawers feature a brilliant 3D-printed push-to-open mechanism. Whether you're organizing hardware, clearing off your workspace, or just want a _fun_ desktop gadget, these stackable drawers are the **perfect weekend print**.

✨ **Pick Your Perfect Size:**

• 🗃️ **Small:** 20 mm height — _Ideal_ for screws, SD cards, and tiny parts.
• 🛠️ **Medium:** 50 mm height — The _sweet spot_ for everyday desk items.
• 📦 **Large:** 75 mm height — _Deep storage_ for bulkier tools.
_(*Note: Usable inner space is a roomy **140×80 mm** for all three sizes!*)_

⭐ **Why It's Awesome:**

• 🔘 **Ultra-Satisfying Mechanism** — Just _press it in_, and the drawer pops right out to greet you!
• 🌲 **Gorgeous Texture** — Modeled with a deep wood grain on the front panels that prints _beautifully_.
• 🧱 **Infinitely Stackable** — Uses secure, easy-sliding dovetail joints to connect. **Zero glue required!**
• ♻️ **Mostly 3D Printed** — The entire latch mechanism is printed; just add a _standard rubber band_.
• 🎁 **The Perfect Gift** — A highly functional, impressive print that friends and family will _actually use_.

📐 **Dimensions & Details:**
**Usable inner space:** 140×80 mm | **Drawer Heights:** 20 mm, 50 mm, 75 mm | _Seamless dovetail interlocks._

🎨 **Recommended Filaments:**
**Matte White** (Get it) • **Wood PLA** (Get it) • **Chocolate Brown** (Get it)

⚙️ **What You Need:**
• **1x Standard Rubber Band:** Get it _(Pro tip: Tighter bands = a stronger pop!)_

🖨️ **Slicing Tips:**
Drop your **outer wall speed** slightly for the cleanest wood grain • Add **extra wall loops** for the mechanism pins for maximum durability • **Supports ON** _only_ for the main storage shell (**Normal Auto Snug**, 3 top/bottom interference layers).

🚀 **Happy Printing! Need help getting started? → Start Here**

Push Push drawer, wooden texture, 3 sizes

STORAGE BOXES 3 sizes.3mf

Elevate your space with the _Harbor Breeze_ ~ a beautifully crafted vase that adds a touch of elegance to any setting. Featuring nautical-inspired bronze & blue lines on a concrete base, this vase seamlessly combines form and function. The _Harbor Breeze_ enhances the aesthetics of your home with its sophisticated charm.

**Build Specifications:**
- Material: PLA, PETG, etc.
- Resolution: 0.2 mm
- Infill: 20%
- Supports: Not needed
- Rafts: Not needed

The _Harbor Breeze_ is easy to print, ensuring a seamless assembly process from start to finish.

**Why Choose Charleston 3D Studio?**
At _Charleston 3D Studio_, we pride ourselves on creating innovative and high-quality 3D printed products. Each design is meticulously crafted to ensure the best user experience and satisfaction.

Pla

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GEN2 Classic Filament Drawer - 240-1W-05H

The Box ~ Customizable Organizer

Interwoven Rings and Strap Tote Bag

DrinkColder (12floz) – Self-Closing Drink Holder & Cooler

Magnetic Dishwasher Sign - CLEAN | DIRTY

The Dock ~ Phone Stand