Lactuca Round Bowl

The organic forms in the Lactuca Series bear a resemblance to the contours of leafy lettuce. Stare at them long enough and your mind might start seeing strange plants and creatures begin to appear!

See here for video: https://youtu.be/yd4LJx4f3vk 

Other designs in the Lactuca Series:
Lactuca Round Bowl: 
Lactuca Cylinder Vase Small: https://than.gs/m/878846 
Lactuca Cylinder Vase Medium: https://than.gs/m/878851 
Lactuca Cylinder Vase Large: https://than.gs/m/878852 


Fully Printable Bottle Opener

This bottle opener, unlike other 3d printed ones that are designed to use coins or other metal objects to pry, is designed to function with plastic alone. 

Please leave comments, as I am trying to improve on the design.

Sink Grid Feet

Our kitchen sink came with a stainless steel grid to protect the bottom from scratches. The grid had plastic or rubber feet that eventually wore out and became gross. Lots of websites sell replacement grids, but I couldn't find anywhere that sells the feet. Luckily the are quite easy to model and print. 

My sink takes 8 feet so I print batches of 16 and just throw the old ones away after six months. I've done them in both natural TPU and black TPE, although I imagine many filaments would work fine.

Includes Fusion360 file.

Egg 2 Egg Tray

Get your kitchen on with a two egg holder that can hold even the largest of eggs.

Smashed Saucer

Frustrated by your 3D printer? Feel like smashing something? This model is for you!

See here for video: https://youtu.be/Zj9uAsy1CM0

This Smashed Teacup is part of a set of Smashed Tableware. See links below for other pieces in the set. More to come!

Other pieces of Smashed Tableware:
Teacup: https://than.gs/m/863790 
Saucer:


Basic Knife Holder V2

Gridfinity Kitchen Drawer Organizers (Collection)

Gridfinity 3x6 Cutlery Holder 2x.stl

Sweet dreams are made of teas 

Reversing Rope Vase

Reversing Rope Vase.stl

Kitchen Door Clip

I have a pretty small kitchen and after a renovation, we lost the spot where we used to hang our dish towels. After some family brainstorming, we came to the conclusion that we need a whole new house... lol. But in the meantime (which could take a few years), the best solution was to design these clips to attach the towels to the door handles. It works pretty well and it went from a temporary solution to a permanent one.

Just a heads up: these clips were designed to fit the doors and handles I have at home. To make it work in your house, you may need to make some adjustments in X, Y, and Z so the clip fits properly in your kitchen.

Oh, and I'd like to point out:
 - it's a quick print that doesn't use much filament.
 - I've been using them in my kitchen for about a year now and haven't had to replace them yet.

Print Settings:
Material: PLA
Layer Height: 0.2
Infill: 15%
Walls: 2 or 3
Supports: No
Change filament during print: If you wish
Pause during print: No
Brim: No
Raft: No

I hope you have fun with this model! If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Peppa Pig cookie cutters

Pepa pig_1.STL

Espresso Knockbox

Having decided not to spend the money on an overpriced bucket for my coffee grinds, I threw together this design and haven't regretted it one bit.
The model is super-strong and printable without supports. I recommend printing in something like PETG (PLA is NOT recommended), and as slow and hot as you can go. 0.16mm layer height recommended, but 0.2mm works well.

Transforming Rope Vase aka The Carla Vase

These coiled-rope bowls fit neatly together for storage.

See here for video: https://youtu.be/AAXGi_Sm62k 

Download the full set:
Small: https://than.gs/m/811394 
Medium: https://than.gs/m/811395 
Large:


Nesting Rope Bowl (Large)

Gudetama -Chef

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***

***
***If you would like to sell physical objects, please see the CCT Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

PORTA BICCHIERI v1.stl

this is a simple cup holder, I designed it for this function but you can give it the use you want. Hope you like it. 

Simple Cup Holder.stl

this is a simple cup holder, I designed it for this function but you can give it the use you want, as a pen holder or container. hope you like it.

Coaster

Coaster Sun.stl

Remix of Coiled Rope Vase

This coiled rope vase is made with a single loop of “rope” that coils up and then loops back to the beginning to form the handle.

See here for video: https://youtu.be/Ca8gKzsuz5Q 

See here for matching pieces:

Coiled Rope Mug: https://than.gs/m/823440 
Coiled Rope Vase:

Similar Coiled Rope Designs:

Nesting Rope Bowls:
Small: https://than.gs/m/811394 
Medium: https://than.gs/m/811395 
Large: https://than.gs/m/811397 


Kitchen

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Lactuca Round Bowl

Fully Printable Bottle Opener

Sink Grid Feet

View 11 new models

Smashed Saucer

View 10 new models

Gridfinity Kitchen Drawer Organizers (Collection)

Sweet dreams are made of teas

Reversing Rope Vase

Kitchen Door Clip

Peppa Pig cookie cutters

Espresso Knockbox

View 15 new models

Gudetama -Chef

PORTA BICCHIERI v1.stl

Simple Cup Holder.stl

Coaster

Remix of Coiled Rope Vase

Potato Masher Concept Kitchen Tool

Coiled Rope Vase