Large Helical Heart with Secret Compartment

Large Helical Heart with Compartment.stl

Slime Ball Fidget Toy by Ruven Bals Print in Place

Slime Ball by Ruven Bals.3mf

Small Helical Heart

This “Small Helical Heart” twists apart into two separate but identical pieces. Print in different colours to highlight the spiral curves.

The “Large Helical Heart” has a hidden compartment for rings or contraband.

See here for video: https://youtu.be/SSzDglASqT4 

Two “Helical Hearts” available:
Large (plain and with hidden compartment):
Small:

The “Large Helical Heart” is 80mm at the widest point, the “Small Helical Heart” is 50mm at the widest point.

Print two copies of the file. In order to preserve a smooth sliding contact surface, print the files on the side as they are oriented. Try raising the model off the bed by 3mm or so and building tree support up to the overhangs.


Sloppy Coiled Rope Bowls

Sloppy Coiled Rope Bowl 1.stl

Plain Seashell for Remixing

Plain Seashell Sample Cross Section.stl

Small Banana Springo // Fruit Springos

banana-half-singlepart.stl

Wavy Springo

Another amazing Springo printed without supports using regular old PLA! This Springo has a smooth wavy surface that can come off as fun or classy, depending on your color choice.

 

Print at .15mm layer height for this to work correctly. Check the layers in your slicer, there should be a 1-2 layer gap between each layer of the spring. I print with 3 shells/outlines and 7 top, 6 bottom layers so the spring itself is solid. After printing, separate carefully with a palette knife, butter knife, etc. How easily the springo separates will vary based on your printer, filament, slicer settings, etc.. So good luck and please share your results!

You should be very cautious separating the layers of the Springo, but once it's correctly popped apart these things are surprisingly resilient for PLA prints. 

Model photographed was printed with [MatterHackers PRO PLA Neon Green](http://bit.ly/NeonGreenPLA). It looks wicked, and glows under a black light!

 

KROMATIK Pot 003

KROMATIK_003_wHoles.stl

Impossible Pass Helix 5 Pack

captured ball helix 3mf.3mf

Springo Cactus Trichocereus

cactus-wflower.stl

Pineapple Springo // Tasty Springos Pack No.1

pineapple-full-bot.stl

Pineapple Springo (Half Size)

pineapple-half-bot.stl

helix · catchall bowl

bowl_2_cprt.stl

Giant Springo Door Stop

Springo.stl

Rocket Springo

A spacey Springo for wobbling through the universe! For best results, print at .15mm layer height with 100% infill. You may scale this by proportionately changing layer height. Prints without supports, just carefully pry the Springo apart after printing! I personally only split apart one of the two helical cuts so the rocket is more springy than floppy (and I was scared of breaking it!)

If you've got a giant printer, combine this with my Rocket Smoke model for an impressive display!



Cube and helix, impossible passthrough illusion

Helix.stl

Strawception Cup

This cup _really_ sucks! Straw and cup become one with the Strawception Cup.

---

I wasn't going to share this file since it's nearly impossible to clean and generally a bad idea, but people keep requesting it and I'm not your mom... so you do you :P

Printed at 100% infill with high flow to make it watertight. I used [MatterHackers Natural Translucent PRO Series PLA](https://bit.ly/NaturalPLA) so I would at least not get pigments with my microplastics.

Pentagon Springo

This five-sided Springo behaves a bit differently! For best results, print at .15mm layer height with 100% infill. Prints without supports, just carefully pry the coil apart with a palette knife, butter knife or something similar after printing!

[Relevant Video](https://www.youtube.com/watch?v=HgY7ovYWplg)



Springo Gift Box (Single Color Version)

One cool thing about Springos is that you can hide little trinkets inside of them. That is especially appropriate with this gift box springo!

Print at .15mm layer height and make sure the coil part is printed solid. 3 shells/outlines have given me good results. No supports required!

This is the single color version of this model. You can find the split model for dual color/material printing in my Holiday Springo set [here](https://www.myminifactory.com/object/3d-print-80142).



Springo Sphere

springosphere-half.stl

Helix

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Large Helical Heart with Secret Compartment

Slime Ball Fidget Toy by Ruven Bals Print in Place

Small Helical Heart

Sloppy Coiled Rope Bowls

Plain Seashell for Remixing

Small Banana Springo // Fruit Springos

Wavy Springo

KROMATIK Pot 003

Impossible Pass Helix 5 Pack

Springo Cactus Trichocereus

Pineapple Springo // Tasty Springos Pack No.1

Pineapple Springo (Half Size)

helix · catchall bowl

Giant Springo Door Stop

Rocket Springo

Cube and helix, impossible passthrough illusion

Strawception Cup

Pentagon Springo

Springo Gift Box (Single Color Version)

Springo Sphere