This custom set of cones is compatible with the open-sourced Head(amame) Headphones V2. 

See here for video: https://youtu.be/hUSOuSBmkHQ 
 
This open-back design allows air to pass through the ear cups from the rear of the speaker driver reducing resonances and low-frequency build-up that would be caused by a rear enclosure. Open-back designs are your best open for clear and natural sound.

Files are provided for single and dual extruder printers:

Single Extruder: https://than.gs/m/930949 
Dual Extruder: https://than.gs/m/930954 

Print two each of the “Cone Top” and “Headband Attachment” files and one of the “Cone Bottom Left” files. Depending on whether you have a mic, print either the “Cone Bottom Right no Mic” or “Cone Bottom Right with Mic” file. 

For the Dual Extruder file set, you will need to combine the appropriate “-Infill” and “-Shell” files in your slicer.

To complete your set of headphones you will need to:
•	Download and print the remaining pieces from https://than.gs/m/908651 
•	Purchase electronics from https://headamame.com/  

Assembly instructions can be found here: https://youtu.be/2iNJaU211fA


Gyroid Cones for Head(amame) Headphones - Dual Extruder Files

Gyroid Cone Bottom Right no Mic - Infill.stl

This custom set of cones is compatible with the open-sourced Head(amame) Headphones V2. 

See here for video: https://youtu.be/hUSOuSBmkHQ 

This open-back design allows air to pass through the ear cups from the rear of the speaker driver reducing resonances and low-frequency build-up that would be caused by a rear enclosure. Open-back designs are your best open for clear and natural sound.

Files are provided for single and dual extruder printers:

Single Extruder: https://than.gs/m/930949 
Dual Extruder: https://than.gs/m/930954 

Print two each of the “Cone Top” and “Headband Attachment” files and one of the “Cone Bottom Left” files. Depending on whether you have a mic, print either the “Cone Bottom Right no Mic” or “Cone Bottom Right with Mic” file. 

For the Dual Extruder file set, you will need to combine the appropriate “-Infill” and “-Shell” files in your slicer.

To complete your set of headphones you will need to:
•	Download and print the remaining pieces from https://than.gs/m/908651 
•	Purchase electronics from https://headamame.com/  

Assembly instructions can be found here: https://youtu.be/2iNJaU211fA


Gyroid Cones for Head(amame) Headphones - Single Extruder Files

Gyroid Cone Bottom Right no Mic.stl

This custom set of cones is compatible with the open-sourced Head(amame) Headphones V2.

See here for video: https://youtu.be/dWh73NtasAc 
 
Print two each of the “Cone Top” and “Headband Attachment” files and one of the “Cone Bottom Left” files. Depending on whether you have a mic, print either the “Cone Bottom Right no Mic” or “Cone Bottom Right with Mic” file. These pieces are designed for resin printing.

To complete your set of headphones you will need to:
•	Download and print the remaining pieces from https://than.gs/m/908651
•	Purchase electronics from https://headamame.com/  

Assembly instructions can be found here: https://youtu.be/2iNJaU211fA

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 with Elegoo Space Grey resin.


Voronoi Cones for Head(amame) Headphones

Display only do not print.stl

---
**Hello fellow enthusiasts!**

---
**Design Overview**
---

This design is also my first entry into a competition, which is the 'Wireless Head/Earphone Accessories' competition on Makerwolrd. If you enjoy this model, it would mean the world to me if you'd go and like and download this on Makerworld too! If not, no stress, you're still awesome and I hope you enjoy it!

- [OTF Headset Holder - Makerworld Competition Link](https://makerworld.com/en/models/666044#profileId-600250)

I stumbled across the OTF fidget knife while I was doing some research on fidgets and couldn't help but think I could use a similar mechanism for a headphone holder. Thus, I have created an OTF Under Desk Headset Holder! Yes, this is a headset holder that uses a switchblade mechanism!

Built for convenience so you can neatly tuck the holder underneath the desk when not in use. It also looks pretty nifty with a fade pattern on the side and some different designs for the front face of the holder!

- [Assembly Instruction Video Link](https://www.youtube.com/watch?v=fIf3o6rckLY)

- [Using This Design Video Link](https://www.youtube.com/watch?v=SLxhmBS3Jxk)

There is also more variations of this design on my Patreon! (the variations with coloured front faces, you'll need a multi-colour printer for these though).

---
**Features**
---
🔹No extra parts or adhesives required for assembly, just print and clip together!
🔹Intended to be stuck to the under-side of a desk with double sided tape or equivalent adhesive.
🔹Three platform designs: plain, skull wearing headphones and basic headphones
🔹The curve of the headset holder has been optimised to the average size of an adult human head so is less likely to crease and/or deform foams, cushions etc.

---
**Print Notes**
---
🔸I have added print orientation advice in the 'Read Me' in the download package
🔸Both smooth and textures beds have been tried and tested
🔸If printing in a material like ABS or ASA, I strongly recommend making sure your chamber temp is sufficiently high to minimise how brittle parts are. Both the spring and spring clips rely on elasticity of material (i.e. they bend, if the part is brittle it won't function as well). I have tried and tested in different PLA variants with good success

---

Please note that this free-to-download version is for personal use only. Commercial license only available via my Patreon! 
- [ShapeMaven Patreon](https://www.patreon.com/ShapeMaven)

If you're feeling extra generous, a like and/or follow on my facebook or insta would be very much appreciated! 
- [ShapeMaven Facebook](https://www.facebook.com/ShapeMaven)
- [ShapeMaven Instagram](https://www.instagram.com/shapemaven/)

OTF Headset Holder - Switchblade Mechanism

Platform - Plain.obj

These cute cat ears easily attaches to any pair of headphones with a simple velcro cable tie (length: 150mm / width: 12mm) that you can cut to your liking. They add a unique factor to your live stream or while gaming. I also have a version with integrated LED lights!

They can also be easily attached to a wide headband. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself. The inserts are fixed easily with a drop of superglue. Try different color combinations. Happy printing!

**Good quality velcro cable tie:**
https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)

**My other models, Cat Ears with integrated RGB light:**
https://cults3d.com/en/creations/rgb-light-cat-ears-for-headphones

**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.

**For best results print as follows:**
-0.2mm layer height
-Arachne generator
-2 wall loops
-Top surface pattern concentric
-Sparse infill density 8%
-Sparse infill pattern gyroid
-I made it from Black and Pink PLA
-No supports needed! 
-STL files already correctly aligned!

Cute Cat Ears for Headphones

cat_ear_001b.stl

This custom set of cones is compatible with the open-sourced Head(amame) Headphones V2. “Diamond” refers to the type of mathematical surface that was used to design the open sections. 

See here for video: https://youtu.be/h3CTt0fO520 

This open-back design allows air to pass through the ear cups from the rear of the speaker driver reducing resonances and low-frequency build-up that would be caused by a rear enclosure. Open-back designs are your best open for clear and natural sound.

Files are provided for single and dual extruder printers:

More Heada(mame) compatible designs:
Gyroid Cones Single Extruder: https://than.gs/m/930949 
Gyroid Cones Double Extruder: https://than.gs/m/930954 

Print two each of the “Cone Top” and “Headband Attachment” files and one of the “Cone Bottom Left” files. Depending on whether you have a mic, print either the “Cone Bottom Right no Mic” or “Cone Bottom Right with Mic” file. 

For the Dual Extruder file set, you will need to combine the appropriate “-Infill” and “-Shell” files in your slicer.

To complete your set of headphones you will need to:
•	Download and print the remaining pieces from https://than.gs/m/908651 
•	Purchase electronics from https://headamame.com/  

Assembly instructions can be found here: https://youtu.be/2iNJaU211fA


Diamond Cones for Head(amame) Headphones

Single Diamond Cone Bottom Left.stl

These textured open-back cones are compatible with the open-sourced Head(amame) Headphones V2. 

To complete your set of headphones you will need to:
- Download and print the remaining pieces from https://than.gs/m/908651 
- Purchase electronics from https://headamame.com/  

Assembly instructions can be found here: https://youtu.be/2iNJaU211fA

This open-back design allows air to pass through the ear cups from the rear of the speaker driver reducing resonances and low-frequency build-up that would be caused by a rear enclosure. Open-back designs are your best open for clear and natural sound.

Biomorphic Headphone Stands: 

More Heada(mame) compatible designs:
Gyroid Cones Single Extruder: https://than.gs/m/930949 
Gyroid Cones Double Extruder: https://than.gs/m/930954 
Diamond Cones: https://than.gs/m/956822 

Print two each of the “Cone Top” and “Headband Attachment” files and one of the “Cone Bottom Left” files. Depending on whether you have a mic, print either the “Cone Bottom Right no Mic” or “Cone Bottom Right with Mic” file.

Spiny Cones for Headamame Headphone

Spiny Cones - R Bottom with mic.stl

A collection of 12 organically grown headphone stands. There is one “symmetrical” model, the rest are all a little weird.   

Print the “Base” file and one of the top pieces. Snap the pieces together and add glue for a more permanent connection. If you want the base to have a bit of weight, select an open infill pattern and add a heavy material such sand while the model is printing.


HEADPHONE

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gyroid Cones for Head(amame) Headphones - Dual Extruder Files

Voronoi Cones for Head(amame) Headphones

OTF Headset Holder - Switchblade Mechanism

Cute Cat Ears for Headphones

Diamond Cones for Head(amame) Headphones