**The complete Zootropolis character collection — 12 chibi-style figurines ready to print at home.**

Zootropolis - Complete Character Collection
12 print-ready STL files from the beloved Disney animated movie
Main Characters: Judy Hopps, Nick Wilde, Chief Bogo, Mayor Lionheart, Dawn Bellwether, Mr. Big, Finnick, Clawhauser
Supporting characters included

Specs:
10cm chibi style figurines
Pre-tested STL files
Resin and FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Zootropolis fans, Disney collectors, and 3D printing enthusiasts.**

Zootropolis Characters STL Files | Kids Cartoon 3D Print Collection

Character_6.stl

**The complete Mickey Mouse character collection - 9 chibi-style figurines ready to print at home.**

Mickey Mouse - Complete Character Collection
9 print-ready STL files from the beloved Disney animated universe
Main Characters: Mickey Mouse, Minnie Mouse, Donald Duck, Daisy Duck, Goofy, Pluto, Chip, Dale, Pete

Specs:
10cm chibi style figurines
Pre-tested STL files
Resin and FDM compatible
One-piece prints
Layer height: 0.1-0.2mm

**Perfect for Disney fans, Mickey Mouse collectors, and 3D printing enthusiasts.**

Mickey Mouse Character STL Files | Kids Cartoon 3D Print Collection

Print of KLN-02M Maasai Moran and KLN-03 Maasai Laibon from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. File set is also separated for the different color palettes between the Moran and Laibon builds with instructions included. Height of assembled model is approximately 4.00" (101mm) tall at the top of the head.

Maasai Moran and Maasai Laibon

Maasai_Laibon_Leg_Waist_Brown.stl

3D model description
Step into the shadows with this exclusive ANBU Mask Collection – six iconic designs inspired by the mysterious operatives from the Naruto universe.

Whether for cosplay, display, or collectors of anime-inspired props, these masks bring the ANBU spirit to life.
Each model is optimized for FDM 3D printing with easy scaling to fit different head sizes.

⚙️ Recommended Print Settings

File format: STL (each mask separate)
Printer volume: 220×220×250 mm or larger recommended
Layer height: 0.2 mm (0.12 mm for high detail)
Infill: 10–15% (higher for durability)
Supports: Required (mainly for eye holes & curved surfaces)
Wall thickness: 2–3 perimeters for strength
Material: PLA / PETG (PLA recommended for easy finishing)

🛠️ Manufacturing & Post-Processing Instructions

Scale the mask to fit your head (usually 90–100% for adults, 80–85% for kids).
Print flat on the back surface for best support efficiency.
After printing, sand with 220–400 grit to smooth out layer lines.
Apply primer filler before painting.
Paint base coat white → then add red details with acrylic or spray paint.
Seal with a clear matte or gloss varnish.
Attach with elastic straps or embed magnets depending on cosplay setup.

ANBU Mask Pack 2 – FOX, BLOODFANG, SPIRALFANG, RAM, SPIRAL, ONI and CUBE

Anbu Spiral Fang.stl

3D model description
Step into the shadows with this exclusive ANBU Mask Collection – six iconic designs inspired by the mysterious operatives from the Naruto universe.

This bundle includes:

Viper – sleek fangs striking down the mask.
Claw – diagonal slashes across the eyes.
Fang – twin vertical streaks for a sharp, fierce look.
Cat – feline elegance, a true hunter’s mask.
Halfmoon – mysterious one-eyed crescent design.
Whisker – playful yet deadly, with sharp whisker marks.

Whether for cosplay, display, or collectors of anime-inspired props, these masks bring the ANBU spirit to life.
Each model is optimized for FDM 3D printing with easy scaling to fit different head sizes.

⚙️ Recommended Print Settings

File format: STL (each mask separate)
Printer volume: 220×220×250 mm or larger recommended
Layer height: 0.2 mm (0.12 mm for high detail)
Infill: 10–15% (higher for durability)
Supports: Required (mainly for eye holes & curved surfaces)
Wall thickness: 2–3 perimeters for strength
Material: PLA / PETG (PLA recommended for easy finishing)

🛠️ Manufacturing & Post-Processing Instructions

Scale the mask to fit your head (usually 90–100% for adults, 80–85% for kids).
Print flat on the back surface for best support efficiency.
After printing, sand with 220–400 grit to smooth out layer lines.
Apply primer filler before painting.
Paint base coat white → then add red details with acrylic or spray paint.
Seal with a clear matte or gloss varnish.
Attach with elastic straps or embed magnets depending on cosplay setup.

Bundle

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Zootropolis Characters STL Files | Kids Cartoon 3D Print Collection

Mickey Mouse Character STL Files | Kids Cartoon 3D Print Collection

Maasai Moran and Maasai Laibon

ANBU Mask Pack 2 – FOX, BLOODFANG, SPIRALFANG, RAM, SPIRAL, ONI and CUBE

ANBU Mask Pack 1 – Viper, Claw, Fang, Cat, Halfmoon, Whisker