Many Fab365 military aircraft enthusiasts showed great response to the recently created F-16. Thank you all.
Based on those expectations, I created an armed set this time. It seems that military airplanes only become cool when they are equipped with weapons.

The assembly process is very simple, just refer to the photos and videos.

https://youtu.be/2pnRVWQ-RhI?si=bJztXDkHtq9RK4Rj

Next, I'm working on a display stand, so look forward to that too.

We hope you will make Fab365's F-16 even more stylish with this weapons set.

Go to see F-16 Fighting Falcon A/C - https://than.gs/m/1513100
Go to see F-16 Display stand - 

1 : 48 scale
Design by GOODesign

F-16 Armament set

GOODesign_F-16_Fighting_Falcon_Fuel-Tank.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign

The F-5E, which I designed this time, was developed as a low-maintenance aircraft and was operated in many countries for a long time. That's why it's a fairly popular airplane. In particular, it appeared as the aircraft used by the main character in the Japanese animation Area 88, proving its popularity.

It's very easy to make, but there are a few caveats.
1. Be sure to remove the support first.
2. To balance the aircraft, AAA batteries to act as weights can be placed under the cockpit. However, for those who are concerned about battery fluid leaking out after a long period of time, we have attached an STL in the shape of an AAA battery, so you can print this and insert it. but. When you want to print and use it, you must print it with 100% infill to act as a weight.
3. The nose radome must be attached to the fuselage with the arrow pointing upward.
4. When assembling the fuselage and wings, pay attention to the shapes of the projections and grooves, align them, and push the wings all the way to the front of the fuselage, then insert the rear part of the fuselage.
5. The flap and aileron hinge at the rear of the main wing must be installed with the center protrusion facing outward. Please check carefully.
6. When installing a horizontal tail wing, you must first insert the hinge part into the wing and then insert the wing into the fuselage.
7. When installing the tire parts of the front landing gear, you must spread the tire parts with force before inserting them. The landing gear is thin and easily broken, so be careful when applying force.

Please check and refer to the video for detailed process.
https://youtu.be/3oaY3Xa5XRc?si=ivuq5sdR4jst86SF

As with other military airplanes, we plan to design an armament set and stand. We hope to receive a lot of response from you all.
Download Display stand - https://than.gs/m/1492964

AirForce

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

F-16 Armament set

F-5E Tiger II