XYZ_CallibrationCube.stl

This is a small and simple XYZ calibration cube for checking the dimensional accuracy of your printer.   The cube has X, Y and Z written along their respective axes.

Once printed either use an accurate ruler or callipers to measure the dimensions of the print. The original model size is 20mm*20mm*20mm however you may wish to resize it to be bigger (or smaller). 

Once you have measured your dimensions you may want to adjust the steps or steps per mm for each axis in your printers firmware - This may or may not be possible depending on your printer. 

To do this you will need to find your current Steps per mm, and then have your observed dimension and expected dimension.

To calculate the new Steps per mm you will need to do:

(Expected/Observed)*Current Steps per mm = New Steps per mm

It is also good as just giving a gauge of how well your 3D printer works with small over hangs and flat faces to check for Z-Banding or ghosting!

Manual Filament Feeder Extruder Gear Knob Mod for CR-10 and other Bowden 3D Printers

extruderknob-v2.stl

#061 Poliwhirl Pokemon Wiremon Figure

🔥Looking for a unique home decor item that will make a statement in any room?🔥 Check out our #061 Poliwhirl Pokemon Wiremon Figure! This digital template allows you to print your own Poliwhirl figure with a stunning wire art design. 🌟Each figure is crafted with incredible attention to detail, bringing out the unique features of this classic Pokemon character.🌟 Whether you're a fan of the Pokemon franchise or simply appreciate beautiful home decor, this figure is sure to impress. 🤩Print it in your favorite color or finish to perfectly match your personal style.🤩 Get your hands on this incredible wire art Pokemon figure today!

Small Spatula

A small spatula that I use to remove the supports from my 3D printed resin objects. 


Cart - Two Wheel Wagon

Gracewindale-cart-shafts.stl

Hydrometer and Desiccant Stand for Bambu Lab X1, AMS, Tool Storage

hydrometer and desiccant stand

Remove Before Print 

removebeforeprint_full.stl

THE WALL OF 3D PRINTING

you can use screws or just tape to attach it as i did 

Valentine's Multicolor Multipart Dropy

Body_Dropy_Frikarte3D.stl

Multicolor Multipart Dropy

Wall support for my 6ft ender 3

for my six foot tall ender 3

( brackets remixed : https://www.thingiverse.com/thing:5821643)


Wall mount.3mf

Days Without Failed Prints

BASE.stl

Locking Block

This is the block that holds the things without any nut-bolt or external things.

" 3D Part Details "

@3D Printing:--
Printer Name :- Creality CR 10 MAX 3D
Printer
Nozzle Size :- 0.8mm

@Wall :--
Wall Line Count :- 4

@Top/Bottom:--
Top/Bottom thickness :- 1.0mm
Top Layer :- 2
bottom Layer :- 2

@Infill :--
Infill Density :- 100%
Infill Patten :- Grid
Infill Line Multiplier :- 2

@Speed :--
Print Speed :- 50mm/s
Infill Speed :- 50mm/s
Wall Speed :- 25mm/s
Outer Wall Speed :- 25mm/s
Inner Wall Speed :- 25mm/s
Top/Bottom Speed :- 25mm/s
Travel Speed :- 150mm/s

@Support :---
Generate Support :- No Support

Video are also there :--

Shadow Daggers

The Shadow Daggers are a cosmetic knife available to players in Counter-Strike: Global Offensive, & are a rare special (★) item

Voron V0.1 Flow Rate Test Race Track - 100mm Flowrate Test

Voron_V0_FlowRate_Test_V3.step

green part.obj

Multi color 3d print with single nozzle .green part of the seal. printed in green PLA standard settings for 0.4 mm nozzle 3 parameters 3mm height. print with conical nozzle. I printed every color separately.

4 printable mini solids of iconic Aural Sculptures by 3BE Audio

AuralSculptureGraceMini.stl

Cauldron Dice Cup

Universal remote upgrade

Projector remote shell full.3mf

Marsgizmo - Elgato Stream Deck and Wave XLR - under Desk Holder

This was a cool project, which I explained here in my video: 
😎👉 https://youtu.be/-gGEP4eyf9w

..more details will follow here soon.

This design is protected by License
License Type = CC BY-NC-SA
(CC Attribution-NonCommercial-ShareAlike)

3D print

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 16 new models

Manual Filament Feeder Extruder Gear Knob Mod for CR-10 and other Bowden 3D Printers

View 104 new models

Small Spatula

View 143 new models

Hydrometer and Desiccant Stand for Bambu Lab X1, AMS, Tool Storage

Remove Before Print

THE WALL OF 3D PRINTING

Valentine's Multicolor Multipart Dropy

Multicolor Multipart Dropy

Wall support for my 6ft ender 3

Days Without Failed Prints

Locking Block

Shadow Daggers

Voron V0.1 Flow Rate Test Race Track - 100mm Flowrate Test

View 40 new models

4 printable mini solids of iconic Aural Sculptures by 3BE Audio

View 19 new models

Universal remote upgrade

Marsgizmo - Elgato Stream Deck and Wave XLR - under Desk Holder