kompetenzbolzen6 followers

GridFinity hexagonal bit module (4mm & 1/4")

166 downloads · 3 years ago · Holder for hex bits. The default build includes sizes 1x1 to 2x2 for 1/4 inch (6.35mm) and 4mm bits.

This model is restricted by licensing terms.

View license.

Description

Holder for hex bits. The default build includes sizes 1x1 to 2x2 for 1/4 inch (6.35mm) and 4mm bits. The source is fully parameterized, so other sizes and bit types can be built manually from the OpenSCAD source.

OpenSCAD Source: https://github.com/kompetenzbolzen/oscad_gridfinity

Tags:

Community Makes (1)

Prints well, default tolerance a bit too loose for my taste.

Community Makes (1)

Discussions

maddiefuzz3 years ago

I printed the stl provided, the 1x2x4 holder, for my 4mm bits. They fit, but they’re very wobbly. I’ll likely fiddle in OpenSCAD to see if I can fix it.

kompetenzbolzen3 years ago

Yup the 4mm are pretty loose. I printed multiple versions with tighter tolerances, but at least with my printer and profile multiple holes were too tight, so I settled for wobbly instead of some slots not usable. The standard tolerance is 0.5mm. it is set as a parameter in the scad file, so changing it should be pretty trivial.

Edit: I tightened the tolerances a bit in the latest version