**A creative hanging planter for your home or garden.**

**What you need:**
- The 3d printed thing
- Yarn with about 3mm in diameter (can be flax, hemp, whatever)

The assembly instructions are in the images.

Size: 90 × 80 × 170 mm

**Print settings**
Required build volume: 90 x 90 x 180 mm
Material usage: 110g
Print time: 10h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: brim

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

Hanging Planter

**A creative hanging planter for your home or garden.**

**What you need:**
- The 3d printed thing
- Yarn with about 3mm in diameter (can be flax, hemp, whatever)

The assembly instructions are in the images.

Size: 90 × 80 × 170 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 90 x 90 x 180 mm
Material usage: 110g
Print time: 10h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: brim

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

**More plants in less space!** This design lets you add an additional plant into a big pot.

It drains through the funnel into the bigger pot. You can rotate the planter on the funnel, and the entire assembly rotates freely around the stem. This way you can position it to get the maximum amount of sunlight while also making sure that it won’t break if you bump against it. It will just spin out of the way. 

Due to the overhang at the bottom of the funnel, your print might shrink a little, for that scenario I also included a screw that is 1.5 mm shorter. Use that as backup if the default one sits too loose!

**Instructions**
- Print all parts
- Plant your plant into the planter
- Place the funnel on the stem and fix it in place with the screw
- Press this assembly into your bigger pot and compact the earth around it a little so it stand up right
- Add the planter
- Rotate the planter on the funnel occasionally for evenly growth


Size of the planter (only the top part): 90x90x90 mm
This is the V3

**Print settings**
Required build volume: 180 x 180 x 100 mm
Material usage: 180 g

Material: PLA
Print direction: files are rotated correctly
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Infill: 15%
Build plate adhesion type: none

Only the screw
Wall count: 5
Infill: 30%

Planter “Extra”

Planter_Extra.3mf

Screw_shorter.stl

Plants

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

tloper2

Achievements

Trailblazer

Plants

Hanging Planter

Planter “Extra”