tracking pixel
AllAll
Search scope
Upload for Search
AllAll
Search scope
Upload for Search
Devin B

Classic Springo

by
Make Anything
Follow
Follow
Remix Model
Social
tjseals
tjseals
|
|
Image 7 of 7
Classic Springo - Springo in Hatchbox Dark Rainbow PLA. Used CHEP hyperfast cura setting at 0.15 layer height, 5walls, which reduced the print time down to 6.5hrs. - 3d model
tjseals
tjseals
|
|
Image 7 of 7
Classic Springo - Springo in Hatchbox Dark Rainbow PLA. Used CHEP hyperfast cura setting at 0.15 layer height, 5walls, which reduced the print time down to 6.5hrs. - 3d model
2D
3D
Makes
Classic Springo 3d model
Classic Springo 3d model
Classic Springo 3d model
Classic Springo 3d model
Classic Springo 3d model
Classic Springo 3d model
Classic Springo - Springo in Hatchbox Dark Rainbow PLA. Used CHEP hyperfast cura setting at 0.15 layer height, 5walls, which reduced the print time down to 6.5hrs. - 3d model
This model is restricted by licensing terms. 
View license.

Believe it or not, you can print a super springy Springo on your FDM 3D printer without any support material!

For best results, print at .15mm layer height with 100% infill. You may scale this by proportionately changing layer height. Prints without supports, just carefully pry the Springo apart after printing! See my video about it for more details.

Category:

Toys & Games
Other

Tags:

27 Likes132 DownloadsAugust 3, 2023
27 Likes132 DownloadsAugust 3, 2023
This model is restricted by licensing terms. 
View license.
TermsTerms & ConditionsSupportFeedbackReportReport ModelPrivacy