tracking pixel
SEREV3d

CatPool - Deadpool Cat - SEREV3d

by
serev3d
Follow
Follow
Remix Model
serev3d
serev3d
|
Image 1 of 6
CatPool - Deadpool Cat - SEREV3d 3d model
serev3d
serev3d
|
Image 1 of 6
CatPool - Deadpool Cat - SEREV3d 3d model
2D
3D
Makes
instagram-play
CatPool - Deadpool Cat - SEREV3d 3d model
CatPool - Deadpool Cat - SEREV3d 3d model
CatPool - Deadpool Cat - SEREV3d 3d model
CatPool - Deadpool Cat - SEREV3d 3d model
CatPool - Deadpool Cat - SEREV3d 3d model
CatPool - Deadpool Cat - SEREV3d 3d model
This model is restricted by licensing terms. 

3D printable Deadpool cat, or should I say CatPool?
Provided in STL format, and also a painted 3mf file too, if you have a multicolor ams system printer!
Join our Patreon now to never miss the monthly SEREV3d giveaways: ▶https://patreon.com/SEREV3d

What filament to use for CatPool? We recommend:

Bambu PLA Basic Red

Bambu PLA Basic Black

Bambu PLA Basic White

Painting recommendation if you don't have a multicolor system printer:

Surface Preparation: Apply a gray or white primer to ensure paint adheres well.
Base Colors: For the body, use a matte or semi-gloss red spray paint for a smooth, even coat. Paint the black areas (around the eyes, limbs, and suit details) with a brush or mask and spray.
Details: Paint the eyes with white acrylic paint for a flat look. Add any final touches like shading or highlights with a dry brush technique. Seal: Seal the model with a matte clear coat to protect the paint and reduce shine

PRINT info and advice:
If you use the print profile we provided the manual tree supports are already set up and added on the file as well as all the recommended settings, with Bambu Slicer it's all fully ready to print!
The easiest way to remove supports from the mouth gap: we recommend to use a thin pliers, blade/knife to cut out/remove the supports.

We are looking forward to see your makes, feel free to share them in the comments!:)

Join our SEREV 3d Patreon All-access SEREV Member tier for Commercial license and access to 50+ awesome 3d printable designs, for ONLY $13


169 Likes524 DownloadsSeptember 1, 2024


169 Likes524 DownloadsSeptember 1, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density10 %
SupportsTree