Creality3D Ender series high flow ring vent (Remix: 0.5 thru 2.5 mm lower)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3471254.

On my Ender-5, this one works beautifully! Thank you Wacio!

On my Ender-3, however, the vent touches the heater-block, so I made 2 new versions, with respectively a 1 and a 2 mm higher top-part.

To know which one to print; this is an approximation!

• Lower nozzle to bed
• measure from bed to underside of part-fan (no shroud)
• subtract 13.46 mm (the total height of the original vent)
• subtract 0.75 mm (the tolerance we want) -> this will give a result, print the vent with the number closest to the result.

Myself, I measured 15.7, giving me 1.49, so I printed and installed the 1.5 variant :)

If you need higher, or a number in between; let me know.

edit: whoops, I accidentally marked the wrong original vent as remixed. This is obviously a remix from the part cooling vent by Wacio, #3345351 edit: added the actual numbers as indicated by TinkerCad.